Fusion Splicer KL-280
Features
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto check quality of cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color LCD monitor with clear digital image display
Simple Operation menu
Specefications
Model KL-280
Applicable fibers SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length 8~16mm（Coating diameter：250µm）
16mm（Coating diameter: 250 ~ 1000µm）
Fiber diameter Cladding diameter：80 ~150µm
Coating diameter：100~ 1000μm
Fiber Count Single
Fiber aligning method Core aligning
Return loss ＞60dB
Actual average splice loss 0.02dB （SM）,0.01dB (MM),
0.04dB (DS),0.04dB( NZDS)
Splicing mode auto
Splicing mode 12(templet), 188(user)
Typical Splicing time Typical 9 sec，with standard SM fiber
Protection sleeve length 60mm, 40mm and a series of micro sleeves
Storage of splice result 5000 results，3 parameter per result
Tension test 2N
Fiber display and magnification 400X（X or Y view）,200X（X and Y view）
Tube heating time Typical 30 sec
Electrode life 2500
No.of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner Li-battery
Display screen 5 inch color LCD monitor
Image change over The fiber image is turned upside down
Terminals RS 232
Operating condition 0 ~ 5000m above sea level,0 ~ 95%RH and -10～50℃,respectively,Max. wind velocity of 15m/s
Power supply AC 100-240V with AC adapter;inner Li-battery(6600mAH)
Dimensions 150mm(L) x150mm (W) x160mm (H)
Weight 3.52 Kg including battery
Other supplier products
|
|
Optical Power meter KL-310 |
Feature
Backlight LCD display
To display optical power in mw,dB and dBm simultaneously
Absolute and relative power measurement
User self reca... |
|
|
Fusion Splicer KL-300T |
Features
Core to core alignment by PAS technology
( PAS:Profile Alignment System)
Digital fusion splicer with automatic focus function
Fiber co... |
|
|
Optical Fiber Fault Locator KL-630 |
Using the time domain analysis technology to locate the fiber faults. It’s designed for the measure of fiber length and the identification of... |
|
|
Fiber Connector KL-510 |
Specifications:
KL-510 locates fiber with high precise V-groove and makes two fibers align, the loss less than 0.5dB(SSM).The two adjustable site-... |
|
|
Optical Tool Box KL-08A |
NO. Name Qty Producing Area Purpose
1
Fiber coat stripper 1 USA peeling the coat of fiber
2
Powerful clamp 1 USA locking workpiece
3
Asse... |
供应产品
Same products
