Wholesale JCA810 Centralized Compressor 1000RPM Cam Shedding High Speed 280cm Air Jet Loom For Cotton Fabric Weaving
JCA810 High speed air jet loomWith the rigidity of the machine frame and top beam further strengthened, the whole machine is of desired stability, beating mechanism optimized, structure further improved. Beating may be done with four-or six-shedding levers and with the six-shedding lever, the warp yarn has longer opening hours, facilitating weft inserting more suitable for wide weaving thus extending its weaving scope.Optional shedding type: crank, cam, dobby, jacquard, it has the feature of electric let-off, electric take-up, variable weft density weaving, automatic stop in case of broken yarn, double weft sensors, electronic measuring, electronic feeder, and electronic control for detection of selvage yarn breakage, weft catching and side yarn making the operation more user-friendly.Optimized rear beam structure: rear beam structure has been improved with more sensitivity for varying of the warp tension. Rear tension roller bracket is installed outside of the machine frame facilitating installation and maintenance.This series has the advantage of strong machine frame, fitting for weaving dense and fine fabrics. Since their let-off, take-up, and detecting are all electronically controlled, it can effectively eliminate the problem of unexpected machine stoppage, mechanical stop, product defects of broken yarn and short weft, thus enhancing weaving quality.【Main Technical Parameters】● Reed space: 150,170,190,230,280,8500px● Max weft density: 1235m/min (depending on fabric type)● Applicable range for weft and yarn: 7 to 60tex (80 to 10Ne) (optional accessory available for fiber less than 10). Long fiber: 5 to 44tex (40 to 400den)● Power transmission: direct star with AC torque motor, reversible at low speed● Shedding: crank, cam, dobby, and jacquard● Beating: four-or six-shedding levers at both sides● Let-off: electrical● Take-up: electrical● Warp stop: 6 lines of electronic warp stop device● Weft stop: double feeler detection system● Weft feeding: free feeding of single or double colors, and weft selection of four colors● Selvage: Rough or closed● Electrical control: weaving parameters can be set up with programmable computer control● Lubrication: oil bath for big gears, let-off box and take-up gears, other parts are lubricated with circulated air.
Other supplier products
|
|
|
JCW503 AC filter weaving water jet loomJCW503 AC filter water jet loom is an innovated model based on our mature plastic round yarn weaving techniq... |
|
|
|
JCA708 Medical gauze air jet loom
JCA708 is innovated and developed based on existing advanced design to replace shuttle loom which has many sho... |
|
|
|
Winder and cutter machineThis machine is a non-woven production line process, cutting the product into required width and length, for packing. Equi... |
|
|
|
JCW501 Mesh weaving water jet loomThis model is designed to interweave plastic round fiber and high-strength polyester fiber into intertexture net.... |
|
|
|
JCA712 Independent compressor air jet loomThis energy-saving model is newly developed by our company. Air pumps are installed at the outside of the... |
供应产品
Same products
