oxygen index apparatus
The oxygen index flammability testeris, perhaps, the most economical and precise quality control test of combustible materials. Its ease of use together with high levels of precision has made this technique a primary characterising and quality control tool to the plastic and electric cable industries and it has been specified by several military and transport groups.
The technique measures the minimum percentage of oxygen in the test atmosphere that is required to marginally support combustion. Note that BS ISO 4589 supersedes BS 2782 Part 141.
Oxygen index test apparatusused to determine the polymer to the desired oxygen concentration (volume percent) in the combustion process. The instrument is simple, easy to operate, through the sensor (import) measurement, the figures showthe results,do not have to be calculated by the formula.
This machine can be used as combustion performance as a means of identification of polymer can be used as a research tool in order to obtain a better understanding of the combustion process of the polymer.
Standards:
Comply with GB/T2406 "Plastic Flammability Test Method-Oxygen Index Method" and JIS7201. BS2782. ANSI/ASTM, D2863. ISO4589. test standards.
Applications:
It isusedtodeterminethelowestoxygendensitythattestedmaterialskeepsteadyburningunderoxygenandnitrogenmixedgas.
Defined:
The Limiting Oxygen Index Tester under the conditions specified, the materials in the minimum oxygen concentration required for combustion of oxygen and nitrogen mixed gas stream. To represent the oxygen percentage of the volume occupied by the value.
The oxygen index is high that the material is nonflammable, low oxygen index of said material is highly flammable and is generally believed that the oxygen index of <22 is a flammable material, oxygen index between 22 --- 27 is a combustible material, oxygen index> 27 is a flame retardant materials.
Parameters:
|
Combustion tube inner diameter |
100mm |
|
High combustion tube |
450mm |
|
Flowmeter accuracy |
2.5 grade |
|
Pressure gauge accuracy |
2.5 grade |
|
Gas source |
GB3863 prescribed oxygen,GB3864 prescribed nitrogen |
|
Test environment |
Temperature:10—35℃ ,Humidity:45[%]—75[%] |
|
Input pressure |
0.2—0.3Mpa |
|
Working pressure |
0.05—0.15Mpa |
|
Sample type |
Self-supporting material and non-self-supporting material |
|
Display |
Digital |
在线联系供应商
Other supplier products
 |
Pipe coating scratch tester | Product Introduction: Paint and varnish scratch resistance tester, also known as scratch resistance tester or balanced scratch rod adhesion resist... |
 |
Syringe sliding performance tester | Product introduction Using a 5.7-inch （120x90） single-color LCD touch screen, the Chinese menu display, and the keyboard to select the nomina... |
 |
Syringe needle flow tester | Product introduction It is a device used to detect the flow of syringes. The principle is to calculate the flow of syringes by measuring the amou... |
 |
Bone Screw Pull-out Tester | Standard YY/T 1504. ASTM F543: standard specifies a test method for measuring the axial force required to extract or fail a metallic bone screw f... |
 |
Bio-absorbable Internal Fixation Plates and Screws Tester | Standard YY/T 0509-2009 (China): Specifies mechanical testing protocols for orthopedic plates/screws made of hydrolyzable polymers, including axia... |
Same products
 |
Steaming Cylinder | 卖方: Standard International Group (HK) Limited | Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | 卖方: Standard International Group (HK) Limited | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | 卖方: Standard International Group (HK) Limited | Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to... |
 |
Button Impact Tester丨Button Impact Test mechine | 卖方: Standard International Group (HK) Limited | Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | 卖方: Standard International Group (HK) Limited | Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m... |
