Textile water evaporation rate tester
Standard:
The design and operation of this tester are aligned with key international and national standards related to assessing the moisture management and drying characteristics of textiles, including:
AATCC Test Method 201
AATCC Test Method 199
AATCC Test Method 200
ASTM E96
Product Advantages:
This Textile Water Evaporation Rate Tester offers significant advantages for laboratories and manufacturers focused on textile performance:
Objective Performance Evaluation: Provides a quantitative and repeatable method for assessing quick-drying, eliminating subjective evaluations.
Simulates Real-World Conditions: Can simulate conditions similar to those experienced when moisture evaporates from fabric in contact with the skin or in specific environmental conditions.
High Accuracy and Repeatability: Utilizes precise measurement systems (e.g., sensitive balance, controlled environment) to ensure reliable and consistent test results.
Efficient Testing: Allows for relatively quick determination of drying rates compared to some other methods.
Data Analysis Capabilities: Often paired with software for real-time data acquisition, visualization of drying curves, and comprehensive report generation.
Scope of Application：
This instrument is used for testing and evaluating the moisture absorption and quick-drying performance of various textiles. The quick-drying property of textiles is assessed by measuring the rate of water evaporation.
Instrument Features：
Equipped with imported high-precision balance, accuracy 0.001g.
Institutional self-locking function to prevent accidents after sudden power failure, ensuring safer use.
Uses high-quality drive motors for smooth operation and low noise.
Optimized structural design for precise positioning.
Can test up to 6 workstations simultaneously or select the number of workstations as needed.
Flexibly set the weighing interval time for experiments.
Test termination condition: evaporation rate change does not exceed 1%.
Automatically generates test result curves.
Automatically calculates evaporation rate, ensuring accurate test data.
Technical Parameters：
| Sensor Accuracy | 0.001g |
| Sample Weight | < 100g |
| Sample Weighing Interval | ≥1 minute |
| Applicable Sample Size | 100mm × 100mm |
| Power Supply and Power | AC220V ± 10V, 50Hz, 200W |
| Instrument Dimensions (L×W×H) | 500 × 450 × 665mm |
| Instrument Weight | 40kg |
| Number of Workstations | 6 workstations (6 motors independently controlled) |
| Control Mode | Computer software upper computer control |
在线联系供应商
Other supplier products
 |
MARK II Slip Resistance Tester | Application: MARK II Slip Resistance Tester used the the principle of the ratio of load horizontal force to vertical force, test the maximum stati... |
 |
Strip evenness tester | Product Introduction: Cotton yarn fiber strip analyzer is a high performance, high test efficiency of textile laboratory instrument, it is used to... |
 |
Automatic freezing point pour point cold tester | Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f... |
 |
Vacuum Ball - Disk Friction Tester | Standards ASTMD4172-94 ASTMD2266-91 SH/T0189-92 Main Purposes The vacuum ball - disk friction tester is a device specifically used for evaluat... |
 |
Floor coverings flammability tester | Applications:TheFlammability Test Chamberis used to test the effects of a small source of ignition on floor coverings. It can be used for either th... |
Same products
 |
Steaming Cylinder | 卖方: Standard International Group (HK) Limited | Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | 卖方: Standard International Group (HK) Limited | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | 卖方: Standard International Group (HK) Limited | Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to... |
 |
Button Impact Tester丨Button Impact Test mechine | 卖方: Standard International Group (HK) Limited | Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | 卖方: Standard International Group (HK) Limited | Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m... |
