LJ TCI bits
Recommended Drilling Parameters
Cutting Structure
The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.The durability of premium tungsten carbide inserts is improved with new formulas and new techniques for insert bit.
Gauge Structure
Multiple gauge protection with gauge trimmers on the heel and gsuge inserts on the gauge suifame of the cone,tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capacity and bearing life.
Bearing Structure
High precision journal bearing with two thrust faces,balls lovk the cone .Hardfaced Head bearing suifame.
Cone bearing inlaid with friction-reducing alloy and then silver-plated.Abrasion resistance and seizure of the bearing are improved,and suitable for high rotary speed.
Seal and Lubrication
The advanced metal seal package consists of two metal seals and two elastic energizers.Compressed energizers ensure good contact being kept on two sealing suifaces of metal rings by elastic force ,and achieves the bearing seal .When drilling,metal seals are relatively dynamic,and the energizers are static.
This will improve the reliability and durability of bearing seal .The pressure compensator system and
advanced grease can greatly increase the lubricating reliabiliry.
Product Application
It is suitable for downhole motor and high speed applications.
Recommended Drilling Parameters
| IADC | WOB(kN/mm)(bit dia) | RPM(r/min) | Applicable Formations |
| 437 447 | 0.35--0.9 | 240--70 | Very soft with low compressive strength and high drillability,such as shale,clav,chalk,mudstone,gypsum,sandstone,soft limestone |
| 517 527 | 0.35--1.0 | 220--60 | Soft with of low compressive and high drillability,such as mudstone .gypsum,salt ,soft shale ,soft limestone.etc. |
| 537 547 | 0.45--1.0 | 220--50 | soft to medium with low compressive strength ,such as medium soft shale,medium soft limestone,medium soft sandstone and medium formation with harder and abrasiver interbeds .etc. |
| 617 627 | 0.45--1.1 | 200--50 | Medium hard with high compressive strength such as limestone hard shale ,sandstone and dolomite,etc. |
| 637 | 0.5--1.1 | 180--40 | Hard fomation with high compressive strength ,such as limestone,dolomite,sandstone,hard gypsum,and marble .etc. |
Note:The upper limits of WOB and RPM in above table should not be used simultancously.
Crystal
Web: tel: mobile:
在线联系供应商
Other supplier products
 |
Matrix body PDC bits | Matrix Body PDC Bits (Inch) MM API(thread) Body type Blades Shape 3 7/8 inch 2 7/8 Steel bod... |
 |
Steel Body PDC Drill Bit | Steel Body PDC Bits (Inch) MM API(thread) Body type Blades Shape 3 7/8 inch 2 7/8 Steel body... |
 |
PDC core bits | Product specification Number of blade 6 Cutter size （mm） 8MM TFA（in^2) 1.200 Gauge length 1.5-0.75" connection 6.75”×4&rd... |
 |
LW steel tooth bits | Cutting Structure The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces. Bearing Structure Non-sc... |
 |
Steel body PDC bits | Steel Body PDC Drill Bit (Inch) MM API(thread) Body type Blades Shape 3 7/8 inch 2 7/8 Steel body Matrix body 3 blades 4 b... |
Same products
 |
pneumatic chuck | 卖方: 00000 | pneumatic chuck Introduce foreign advanced technology and management concept, High precision... |
 |
金刚石水钻头混凝土干钻湿钻源头工厂激光焊高频焊 | 卖方: 河北柯能工具有限公司 | 钢筋混凝土金刚石钻头 产品描述 该金刚石钻头专门用于钢筋混凝土、砖块、砌块、砖石等建筑材料的钻孔施工。产品采用优质工业级金刚石及高品质金属粉末配方制造... |
 |
Advanced Ceramics | 卖方: 859218 | Zhejiang Zhufa Precision Ceramics Technology Co., Ltd. specializes in Advanced Ceramics, includin... |
 |
Advanced Ceramics | 卖方: 859218 | Zhejiang Zhufa Precision Ceramics Technology Co., Ltd. specializes in Advanced Ceramics, includin... |
 |
Turnbuckle Hardware | 卖方: Hebei Yipeng Line Equipment Manufacture Co., Ltd. | Turnbuckle Hardware The Ultimate Guide to If you're involved in construction, rigging, or ... |
