Hangzhou Sens Magnetics LLC
Contact information
Hangzhou Sens Magnetics LLC is an Alnico, FeCrCo, SmCo,NdFeB and ceramic magnet and magnetic assembly supplier in Hangzhou ,China. We supply first-class permanent magnetic products.
We have a youthful mind and a never give up spirit, do everything carefully and seriously. At the same time, we also advance the industry actively.
We put all the efforts and time into such a wonderful magnetic field together with many years knowledgeable technology and experience, make us as one of your best vendors.
Products:
 |
Alnico Magnets | Cast Alnico 5 is the most commonly used of all the cast Alnico magnets. This material is used extensively in rotating machinery, meters, instrument... |
 |
Cast Alnico Alcomax3 | AlNiCo permanent magnets have been made from alloys of aluminum, nickel and cobalt with iron. Alnico and alcomax are two of the trade names of such... |
 |
Alnico Pot Magnet | Alnico Shallow Pot with red paint Alnico Shallow Pot is our recommended product. We,SENS Magnetic Products, Inc is an Alnico Shallow Pot and SmCo p... |
 |
Alnico6 | Alnico6 ring,diametrally magnetized.super accurate. Alnico alloys basically consist of aluminum, nickel, cobalt, copper, iron and titanium. In some... |
 |
Sm2Co17 | Applications of Samarium Cobalt Magnets Computer disc drives Sensors Traveling wave tubes Linear actuators Satellite systems Motors where temporary... |
 |
Sintered SmCo | NdFeB magnets can be manufactured by sintering, compression bonding, injection molding, and extrusion. The sintered form holds the highest energy p... |
 |
Bonded SmCo | Samarium Cobalt (SmCo) magnets, of the Rare Earth class, have been available since the early 1970's. These magnets possess very high magnetic prope... |
 |
FeCrCo & Crovac | FeCrCo is one of machinable permanent magnetic alloy, which has good plasticity, ductility and machinability. It has the similar properties with Al... |
 |
CoFeVCr | Characteristics and Performance of FeCrCo Magnets Characteristics: Has similar Alnico5 magnets performance. Can be machined by drilling, milling, g... |
 |
FeCrCoMo | Characteristics: Has similar Alnico5 magnets performance. Can be machined by drilling, milling, grinding, punching and so on. Can be made to small ... |
 |
Sintered NdFeB | NdFeB magnets can be manufactured by sintering, compression bonding, injection molding, and extrusion. The sintered form holds the highest energy p... |
 |
Bonded NdFeB | The compression molded magnets are limited for simple geometries, but they can offer higher magnetic strength than injection molded magnets because... |
 |
Ceramic | Hard Ferrite (ceramic) magnets, composed of barium or strontium, were developed in the early 1960's as an alternative to the more expensive metalli... |
 |
Magnets | Our magnetic products： Magnets and pickups do not have sounds, a manget's sonic result in guitar pickups application depends primarily on the stren... |
 |
Small Magnets | Sens Magnetic Products, Inc,(SensMag, Inc) can make micro magnets in Alnico, NdFeB, SmCo , Ceramic CeCoCuFe and other materials with very tight tol... |
 |
Magentic Cups | Ceramic Pot (RB) is our recommended product. We,SENS Magnetic Products, Inc is an Ceramic Pot (RB) and SmCo permanent magnet manufacturer in Hangzh... |
 |
Magnetic Lifters | Mainly uses in the hoisting process with by the hoisting work piece connection,uses in to move the steel plate and other magnetic induction work pi... |
 |
Neodymium Iron Boron | NdFeB magnets can be manufactured by sintering, compression bonding, injection molding, and extrusion. The sintered form holds the highest energy p... |
 |
Channel Magnets | Ceramic(Hard ferrite) magnets were developed in the early 1960 as a low-cost alternative to metallic magnets (steels and alnico), Ceramic magnets a... |
 |
NdFeB Magnets | Bonded NdFeB magnets are produced by binding rapid-quenching Nd-Fe-B powders which is mixed with plastic resin to form a magnet by compression mold... |
