QSFP28 100G SR4 100M
QSFP28 100G SR4 100M
The QSFP28 100G-SR4-100m module is a highly integrated 4x25G transceiver focused on reach, bandwidth, density and cost for high port-count 100G systems, and client-side 100G interfaces. Each lane can operate at 25Gbps up to 70m using OM3 fiber or 100m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38-contact edge type connector. The optical interface uses a 12-fiber MTP/MPO connector.
Features of 100GQSFP28 SR4100m
4 channels full-duplex transceiver modules
Transmission data rate up to 25Gbps per channel
4 channels 850nm VCSEL array
4 channels PIN photo detector array
Hot-pluggable QSFP28 form factor
Maximum link length of 70m on OM3 Multimode Fiber(MMF) and 100m on OM4 MMF
Single 1X12 MPO connector receptacle Hot-pluggable electrical interface
0–70°C operating temp
Low power consumption < 2.5W
RoHS6 compliant (lead-free)
Applications of QSFP28 100G SR4 100m
100GBASE-SR4 100G Ethernet
Specifications of QSFP28 100G SR4 100m
Recommended Operating EnvironmentOptical Transmitter PerformanceOptical Receiver Performance
Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Power Supply Voltage |
VCC |
V |
|||
Operating Case Temperature |
TC |
0 |
25 |
70 |
°C |
Pin Descriptions of QSFP28 100G SR4 100m
Pin Definition of QSFP28 100G SR4 100m
Pin |
Symbol |
Name/Description |
1 |
GND |
Ground |
2 |
Tx2n |
Transmitter Inverted Data Input |
3 |
Tx2p |
Transmitter Non-Inverted Data Input |
4 |
GND |
Ground |
5 |
Tx4n |
Transmitter Inverted Data Input |
6 |
Tx4p |
Transmitter Non-Inverted Data Input |
7 |
GND |
Ground |
8 |
ModSelL |
Module Select |
9 |
ResetL |
Module Reset |
10 |
Vcc Rx |
+3.3 V Power supply receiver |
11 |
SCL |
2-wire serial interface clock |
12 |
SDA |
2-wire serial interface data |
13 |
GND |
Ground |
14 |
Rx3p |
Receiver Non-Inverted Data Output |
15 |
Rx3n |
Receiver Inverted Data Output |
16 |
GND |
Ground |
17 |
Rx1p |
Receiver Non-Inverted Data Output |
18 |
Rx1n |
Receiver Inverted Data Output |
19 |
GND |
Ground |
20 |
GND |
Ground |
21 |
Rx2n |
Receiver Inverted Data Output |
22 |
Rx2p |
Receiver Non-Inverted Data Output |
23 |
GND |
Ground |
24 |
Rx4n |
Receiver Inverted Data Output |
25 |
Rx4p |
Receiver Non-Inverted Data Output |
26 |
GND |
Ground |
27 |
ModPrsL |
Module Present |
28 |
IntL |
Interrupt |
29 |
Vcc Tx |
+3.3 V Power supply transmitter |
30 |
Vcc1 |
+3.3 V Power Supply |
31 |
LPMode |
Low Power Mode |
32 |
GND |
Ground |
33 |
Tx3p |
Transmitter Non-Inverted Data Input |
34 |
Tx3n |
Transmitter Inverted Data Input |
35 |
GND |
Ground |
36 |
Tx1p |
Transmitter Non-Inverted Data Input |
37 |
Tx1n |
Transmitter Inverted Data Input |
38 |
GND |
Ground |
Important Notice of QSFP28 100G SR4 100m
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by T&S before they become applicable to any particular order or contract. In accordance with the T&S policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of T&S or others. Further details are available from any T&S sales representative.
T&S Communicationsis a professional fiber optic accessories suppliers, we provide plc splitter 1x32, qsfp28 sr4and etc. Want to know more? Please contact us.
Send product request
Other supplier products
BAND SEPARATOR WDM DEVICE | T&S BWDM 3 Ports Device is a kind of FWDM device that can separate C-band and L-band or split C-band into two parts, or split L-band into two p... | |
MTP/MPO LOOPBACK | T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed b... | |
MTP/MPO CABLE ASSEMBLIES | MTP cable assemblies/MPO cable assembly use MPO or MTP multi-fiber connectors. MTP/MPO Fiber Patch Cord greatly saves space and is very convenient ... | |
MTP®/MPO Harness Cable | MTP/MPOharness cables are a kind of MTP®/MPO fanout harness cable or breakout fiber optic harness assemblywith one MTP®/MPO connector on on... | |
25G SPF28 AOC | 25GSFP28 AOC TSCommunicationTSSP-8525G-xxxC is a single-Channel, Pluggable, Fiber-Optic SPF28for 25 Gigabit Ethernet and Infiniband EDR Applicatio... |
Same products
SFP28 25G Copper Twinax Cable XM DAC | Seller: Wuhan Gearlink Technology Co., Ltd. | SFP28 Direct Attach Cables (25g sfp28 dac) are compliant with SFF-8432 and SFF-8402 specification... | |
SFP28 25G 1310nm 10km DDM LC Transceiver | Seller: Wuhan Gearlink Technology Co., Ltd. | SYSP8A10D SFP28 lrtransceivers, according to 25 Gigabit Small Form Factor Pluggable “SFP28&... | |
SFP 155M 1550nm 80Km LC Transceiver | Seller: Wuhan Gearlink Technology Co., Ltd. | GearLink’s 100M SFP optical fibre transceiverGAS7L0C31 is a small pluggable transceiver mod... | |
SFP+ 10G Tx1330/Rx1270 40Km LC Transceiver | Seller: Wuhan Gearlink Technology Co., Ltd. | The SFP-10G-BX40 series single mode sfp transceiveris a small form-factor pluggable module for du... | |
SFP+ 10G Tx1330/Rx1270 10Km LC Transceiver | Seller: Wuhan Gearlink Technology Co., Ltd. | SFP+ 10G Tx1330/Rx127010Km LC Transceiver belongs to SFP+ BIDI series products. BIDI single-fiber... |