SFP 1.25G Tx1550/Rx1490 80Km LC Transceiver
Gearlink’s GCS7L0C54 SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The china optical transceiverconsists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1490nm DFB laser (the 1550nm DFB laser), and the PIN/TIA. The module data link up to 80km in 9/125um Single-mode fiber.
This transceiver meets the Small Form Pluggable (SFP) industry-standard package utilizing an integral LC-Bi-directional optical and bidi multimodesfp interface connector. An enhanced Digital Diagnostic Monitoring Interface compliant with SFF-8472 has been incorporated into the transceiver. It allows real-time access to the transceiver operating parameters such as fiber transceivertemperature, laser bias current, transmitted optical power, received optical power, and transceiver supply voltage by reading a built-in memory with an I²C interface.
The optical output can be disabled by an LVTTL logic high-level input of Tx Disable, and the system also can disable the module via I²C. Tx Fault is provided to indicate the degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of the receiver or the link status with the partner. The system can also get the LOS (or Link)/Disable/Fault information via I²C register access.
Compatibility of SFP 1.25G Tx1550/Rx1490 80Km LC Transceiver
GLC-BX80-D-I1000BASE-BX80-U-SMF TX:1550nm/RX:1490nm 80km
Technical Specification Of SFP 1.25G Tx1550/Rx1490 80Km LC Transceiver
General Specifications
Parameter |
Symbol |
Min |
Max |
Unit |
|
Bit Rate |
BR |
Gb/sec |
|||
Max |
80 |
km |
Absolute Maximum Ratings
Parameter |
Symbol |
Min |
Max |
Unit |
||
Storage Temperature |
TS |
-40 |
85 |
ºC |
||
Storage Ambient Humidity |
HA |
5 |
95 |
% |
||
Power Supply Voltage |
VCC |
-0.5 |
4 |
V |
||
Signal Input Voltage |
-0.3 |
Vcc+0.3 |
V |
|||
Receiver Damage Threshold |
3 |
dBm |
||||
Lead Soldering Temperature/Time |
Told |
260/10 |
ºC/sec |
Note 1 |
||
Lead Soldering Temperature/Time |
Told |
360/10 |
ºC/sec |
Note 2 |
Send product request
Other supplier products
SFP28 25G Copper Twinax Cable XM DAC | SFP28 Direct Attach Cables (25G DAC) are compliant with SFF-8432 and SFF-8402 specifications. Various choices of wire gauge are available from 30 t... | |
SFP 155M Tx1310/Rx1550 20Km LC Transceiver | The sfp bdtransceivers are high-performance, cost-effective modules supporting a dual data rate of 155Mbps and a 20km transmission distance with SM... | |
SFP+ 10G Tx1330/Rx1270 10Km LC Transceiver | SFP+ 10G Tx1330/Rx127010Km LC Transceiver belongs to SFP+ BIDI series products. BIDI single-fiber bidirectional optical module needs to use differe... | |
1.25G SFP Transceiver | WHgearlink’s SFP transceiver is a hot-pluggable optical module. SFP means small form-factor pluggable. compatible sfp modules can be simply u... | |
40G QSFP+ Transceiver | 40G optical transceiver is packaged in sfp+ qsfp+. 40g qsfp+ transceiver has four independent full-duplex transmission and reception channels, and ... |
Same products
SFP28 25G Copper Twinax Cable XM DAC | Seller: Wuhan Gearlink Technology Co., Ltd. | SFP28 Direct Attach Cables (25g sfp28 dac) are compliant with SFF-8432 and SFF-8402 specification... | |
SFP28 25G 1310nm 10km DDM LC Transceiver | Seller: Wuhan Gearlink Technology Co., Ltd. | SYSP8A10D SFP28 lrtransceivers, according to 25 Gigabit Small Form Factor Pluggable “SFP28&... | |
SFP 155M 1550nm 80Km LC Transceiver | Seller: Wuhan Gearlink Technology Co., Ltd. | GearLink’s 100M SFP optical fibre transceiverGAS7L0C31 is a small pluggable transceiver mod... | |
SFP+ 10G Tx1330/Rx1270 40Km LC Transceiver | Seller: Wuhan Gearlink Technology Co., Ltd. | The SFP-10G-BX40 series single mode sfp transceiveris a small form-factor pluggable module for du... | |
SFP+ 10G Tx1330/Rx1270 10Km LC Transceiver | Seller: Wuhan Gearlink Technology Co., Ltd. | SFP+ 10G Tx1330/Rx127010Km LC Transceiver belongs to SFP+ BIDI series products. BIDI single-fiber... |