pipe support

This type of pipeline support is used for large pipelines. The top is equipped with an arc plate or flat steel pipe clamp suitable for the pipe diameter. It is used to fix, support and adjust the direction of the pipeline. It can be used with spring support to slow down and absorb pipeline vibration.

According to different installation requirements, it can be divided into Wanxiang sliding type, guiding type, and welding fixed type.

1. Universal sliding type: directly welded to the pipeline to support the pipeline, with a sliding plate on the lower side. Can be adjusted in any direction. According to the requirements of temperature and medium, there are usually carbon steel or galvanized, 12CR1mov, and stainless steel. The applicable pipe diameter is usually DN600-DN2000. Beyond this range, it can be customized according to the size.

2. Guided sliding type: directly welded to the pipeline to support the pipeline, with a sliding plate on the lower side. But it is limited to the adjustment of the guide rail direction. According to the requirements of temperature and medium, there are usually carbon steel or galvanized, 12CR1mov, and stainless steel. The applicable pipe diameter is usually DN600-DN2000. Beyond this range, it can be customized according to the size.

3. Fixed type: directly welded to the pipeline to support the pipeline, the embedded steel plate needs to be installed on site, and the bottom is welded to the embedded steel plate. The direction cannot be adjusted after the fixed. According to the requirements of temperature and medium, there are usually carbon steel or galvanized, 12CR1mov, and stainless steel. The applicable pipe diameter is usually DN600-DN2000. Beyond this range, it can be customized according to the size.