Socket Spigot Tee with Flanged Branch
The T socket fittings are according to ISO2531, BSEN545/598 BS4772 .They are mainly used for transferring the drinkable water, waste water and for irrigation. The size is from DN50mm-DN2000mm .Internal Ling with port land cement mortar according to ISO4179, external coating with Zinc plus bitumen according to ISO8179 or Fusion Bond Epoxy coating both internal and external. The pressure rate is PN10 PN16 PN25 .SBR or EPDM Rubber Rings is available.
Ductile iron Fittings include Double socket Bend, Socket Elbow, Flange Socket, Double socket tee, Socket Spigot tee, T Socket Fittings, Double Socket Reducer, Double Socket Duckfoot bends, All -Socket tees with 45 ° angle banch, Double Socket Tee with Flange tee.
|
Inspection |
SGS, BV, third party inspection |
|
Material |
Ductile Cast Iron GGG50, QT500-7/450-10,FGS500-7,420-12 |
|
Standard |
ISO2531 BS EN545 EN598 BS4772 DIN2501,GBT13295 |
|
Flange drilled |
ISO7005-2,BS4504, EN1092-2, DIN2501 |
|
Pressure |
PN10, PN16,PN25 |
|
Specification |
DN50 to DN2000, K12/14 |
|
Joints type |
Flange, Typon joint(push on joint); Bolted Gland K typeJoint |
|
Application |
water supply project, drainage, sewerage, Irrigation ,water pipeline |
|
Certificates |
ISO2531:2009, EN545:2010,EN598 ISO9001, ISO14001, ISO18001. |
|
Surfce Inside |
Portland Cement mortar lining ,bitumen paint, epoxy paint/powder |
|
Surface Outside |
Epoxy paint, bitumen paint, epoxy powder coating |
|
Accessories: |
SBR or EPDM Rubber Rings are available |
|
Packingmethods: |
woodencase/palletwithplasticlayer,oraspercustomer'srequirements, |
ZhuCheng Three—dimensional Pipeline Co., Ltd
Send product request
Other supplier products
 |
All flanged Tee ISO2531 | The ductile iron flanged fittings are manufactured by Zhucheng Three-dimensional Pipeline Com., Ltd are mainly used for transferring the drinkable ... |
 |
Stepped couplings | Ductile iron Steped coupling are according to ISO2531, BSEN545/598.They are mainly used for transferring the drinkable water, waste water and for ... |
 |
Double Socket tees with flange branch | Double Socket tees with flange branch Ductile iron K type Bolt Gland Fittings are according to ISO2531, BSEN545/598.They are mainly used for transf... |
 |
Ductile Iron All flanged Tee | Ductile Iron All flanged Tee The ductile iron flanged fittings are manufactured by Zhucheng Three-dimensional Pipeline Com., Ltd are mainly used fo... |
 |
Flange Socket | Flange Socket The ductile iron flanged fittings are manufactured by Zhucheng Three-dimensional Pipeline Com., Ltd are mainly used for transferring ... |
Same products
 |
UHMWPE pipe for mining in Australia | Seller: Shandong Yanggu Dragon New Material Co Ltd | UHMWPE pipe for mining in Australia Discover the Ultimate Solution: Are you ready to eleva... |
 |
20543RW Interlock One Piece Fittings | Seller: Hebei Zhongke Huatai Fluid Technology Co., Ltd | 20543RWInterlock One Piece Fittings Product Introduction H20543RW HT H... |
 |
20411RW One Piece Fittings | Seller: Hebei Zhongke Huatai Fluid Technology Co., Ltd | HT HydraulicsSince 1987 Hydraulic Hose Fitting -One Piece Fittings Metric Female 24° Cone O-... |
 |
26713RW Interlock One Piece Hose Fittings | Seller: Hebei Zhongke Huatai Fluid Technology Co., Ltd | HT Hydraulics Since 1987 Hydraulic Hose Fitting-Interlock One Piece Fittings JIC FEMALE 74° ... |
 |
Cup Nut Pipe Loop | Seller: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Size: 1”~8”Material: Carbon SteelDimension: UL 203, MSS SP-58/69 (Type-7)Surface: Pre... |
