NACE MR0175/ISO 15156 Steel pipe
This standard applies to all components of equipment exposed to sour environments, where failure by SSC or SCC would (1) prevent the equipment from being restored to an operating condition while continuing to contain pressure, (2) compromise the integrity of the pressure-containment system, and/or (3) prevent the basic function of the equipment from occurring. Materials selection for items such as atmospheric and low-pressure systems, water-handling facilities, sucker rods, and subsurface pumps are covered in greater detail in other NACE International and API documents and are outside the scope of this standard.
Other supplier products
|
|
Acoustic Pipe used for Pile foundation |
Acoutic pipes are used for piling foundation for the test of the length. One end is closed and the other end is covers with cap. All the acoustic p... |
|
|
ASTM A53/A106 hot rolling carbon steel seamless steel pipe |
The size for hot rolling pipes is generally from 2" to 18", wall thickness is from 2mm to 60mm. The carbon materials include API 5L GR.B- X80. ASTM... |
|
|
ASTM A105 Flange (SW,BW), ASME B16.5 |
The flanges can be divided into threaded flange, welded flange, and clamp flange. Also according to the type, there are WN, SO, Blind flange. The f... |
|
|
45Mn2 pump pipe/tube, carbon steel pump pipe/ tube |
The pump tube usually has two kinds of materials, low-alloy and carbon steel. There are usually three size: DN125, DN150 and DN80, but also can off... |
|
|
ASTM A333 SMLS for low-temperature service pipe |
ASTM A333 seamless and welded steel pipe for low-temperature service. It has request toward the impact test. |
All supplier products
Same products
