.

Fire Sleeving

500°F/260°CContinuous Exposure: Higher Intermittent

Aerospace AS1072 Grade Fire Sleevingwas specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.

Aerospace AS1072 Grade Fire Sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).

Sheds splash immediately
Aerospace AS1072 Grade Fire Sleevingwithstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.

Withstands intense radiant heat and flame
Aerospace AS1072 Grade Fire Sleeve will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.

Aerospace AS1072 Grade Fire Sleevingis constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.


Send product request

To: Ningguo BST thermal Products Co.,Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

fire protection heat sleeve
fire protection heat sleeve 500°F/260°C Continuous Exposure: Higher Intermittent fire protection heat sleeve hydraulic hose protection heat sleeveis designed to protec...
hydraulic hoses protection fire resistant sleeve
hydraulic hoses protection fire resistant sleeve 500°F/260°C Continuous Exposure: Higher IntermittentAS1072 Gradehydraulic hoses protection fire resistant sleeveAerostyle Fire Sleevewas sp...
basalt fiber braided sleeve
basalt fiber braided sleeve This Texturized basalt fiber braided sleeveis made by texturized basalt yarns trap greater amounts of air and demonstrates better insulation proper...
hydraulic protection thermosleeve
hydraulic protection thermosleeve 500°F/260°C Continuous Exposure: Higher Intermittent hydraulic protection thermosleeve Knitted high bulk glass fiber fire sleeve can withs...
muffler heat shield blanket
muffler heat shield blanket muffler heat shield blanketis made by customs drawing. Use special materials and special thread.Removable blanket type insulation can be custom mad...
All supplier products

Same products

Nylon Head Hot Dip Galvanized Spindle For Pin Insulator
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator Seller: Electric Powertek Company Ltd Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm...
ANSI C29.5 55-4M Pin Insulator for Bangldesh
ANSI C29.5 55-4M Pin Insulator for Bangldesh Seller: Electric Powertek Company Ltd The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ...
Ground Wire Glass Insulator
Ground Wire Glass Insulator Seller: Electric Powertek Company Ltd Glass insulatorsare a crucial component in the insulation and support of overhead transmission li...
Phenolic Thermal Insulation Board
Phenolic Thermal Insulation Board Seller: Langfang Clear Chemical Building Materials Co., Ltd Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c...
Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr...