High temperature protective sleeve
500°F/260°CContinuous Exposure: Higher Intermittent
High temperature protective sleeve
Aerospace AS1072 Grade Fire Sleeve was specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.
High temperature resistant sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Sheds splash immediately
High temperature protective sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.
Withstands intense radiant heat and flame
Aerospace AS1072 Grade Fire Sleeve will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.
Aerospace AS1072 Grade Fire Sleeve is constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.
Send product request
Other supplier products
 |
color exhaust heat wrap | color exhaust heat wrapfeatures a color coating which not only gives your vehicle that custom look, but it also increases the life of the colored e... |
 |
fireproof thermosleeve | 500°F/260°C Continuous Exposure: Higher Intermittent fireproof thermosleeve Knitted high bulk glass fiber fire sleeve can withstand repeat... |
 |
hydraulic tube protection heat sleeve | 500°F/260°C Continuous Exposure: Higher Intermittent hydraulic tube protection heat sleeve hydraulic hose protection heat sleeveis designed... |
 |
silica needle felt | BST-SIM silica needle feltmade by 96% silica fiberglass chopped strand through carding and needling process. Excellent insulation for sandwiching b... |
 |
High Temperature Silica Fabric | High Temperature Silica Fabricis suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
