silicone coated fiberglass fire resistant sleeve with velcro

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

500°F/260°C Continuous Exposure: Higher Intermittent
AS1072 GradeAerostylesilicone coated fiberglass fire resistant sleeve with velcro

Aerostyle silicone coated fiberglass fire resistant sleeve with velcrowas specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.

Aerostyle Fire Sleevecan withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).

Sheds splash immediately
Aerospace AS1072 Grade Fire Sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.

Withstands intense radiant heat and flame
Aerospace AS1072 Grade Fire Sleeve will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.

Aerostyle Fire Sleeveis constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.

Protect your personnel and cut your energy loss
Aerospace AS1072 Grade silicone coated fiberglass fire resistant sleeve with velcrois insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.

Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd

Other supplier products

	silicone fiberglass high temperature sleeve	500°F/260°C Continuous Exposure: Higher Intermittent silicone fiberglass high temperature sleeve Knitted high bulk glass fiber fire sleev...
	silicone coated heat sleeve	500°F/260°C Continuous Exposure: Higher Intermittent silicone coated heat sleeve Knitted high bulk glass fiber fire sleeve can withstand r...
	heat resistant silica tape with adhesive backing	heat resistant silica tape with adhesive backing is a slit silica tape constructed from 96% pure SiO2 silica fiber, coated one side with a pressure...
	Multicolor Rescue Tape Self Fusing Silicone Repair Tape	Multicolor Rescue Tape Self Fusing Silicone Repair Tapeis the Original self-fusing silicone insulating & repair wrap. Hose repairs Silicone R...
	hydraulic hose heat protection fire resistant sleeve with hoop and loop fastener	500°F/260°CContinuousExposure:HigherIntermittent hydraulic hose heat protection fire resistant sleeve with hoop and loop fastener Braided...

Same products

	Nylon Head Hot Dip Galvanized Spindle For Pin Insulator	Seller: Electric Powertek Company Ltd	Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm...
	ANSI C29.5 55-4M Pin Insulator for Bangldesh	Seller: Electric Powertek Company Ltd	The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ...
	Ground Wire Glass Insulator	Seller: Electric Powertek Company Ltd	Glass insulatorsare a crucial component in the insulation and support of overhead transmission li...
	Phenolic Thermal Insulation Board	Seller: Langfang Clear Chemical Building Materials Co., Ltd	Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c...
	"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK	Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr...