fire sleeve

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

500°F/260°C Continuous Exposure: Higher Intermittent
AS1072 GradeAerostyle Fire Sleeve

Aerostyle Fire Sleevewas specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.

Aerostyle Fire Sleevecan withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).

Sheds splash immediately
Aerospace AS1072 Grade Fire Sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.

Withstands intense radiant heat and flame
Aerospace AS1072 Grade Fire Sleeve will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.

Aerostyle Fire Sleeveis constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.

Protect your personnel and cut your energy loss
Aerospace AS1072 Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.

Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd

Other supplier products

	Fire Sleeving	500°F/260°CContinuous Exposure: Higher Intermittent Aerospace AS1072 Grade Fire Sleevingwas specially developed to meet the fire resista...
	silicone fire sleeve	500°F/260°C Continuous Exposure: Higher IntermittentAS1072 GradeAerostylesilicone fire sleevesilicone fire sleevewith velcrowas specially d...
	Silica Adhesive Backed Tape	Silica Adhesive Backed Tapeis a slit silica tape constructed from 96% pure SiO2 silica fiber, coated one side with a pressure sensitive adhesive ba...
	Spark Plug Wire Heat Shield Sleeve	Spark Plug Wire Heat Shield Sleeveprotect your expensive plug wire set’s performance and increase their lifetime.Spark Plug Boot Protectorfit...
	Exhaust Insulation Blankets	Exhaust Insulation Blanketsis used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In particu...

Same products

	Nylon Head Hot Dip Galvanized Spindle For Pin Insulator	Seller: Electric Powertek Company Ltd	Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm...
	ANSI C29.5 55-4M Pin Insulator for Bangldesh	Seller: Electric Powertek Company Ltd	The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ...
	Ground Wire Glass Insulator	Seller: Electric Powertek Company Ltd	Glass insulatorsare a crucial component in the insulation and support of overhead transmission li...
	Phenolic Thermal Insulation Board	Seller: Langfang Clear Chemical Building Materials Co., Ltd	Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c...
	"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK	Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr...