hydraulic hose protection sleeve
hydraulic hose protection sleeveis a common term for a Silicone coated fiberglass sleeve, generally used in industrial or aerospace applications.
Fiberglass acts as an insulator or barrier for constant temperatures up to 540ºC. Silicone is generally able to withstand temperatures up to about 260C degrees continuous. Silicone, however, has the added benefit of being able to withstand and repel much higher temperatures for short durations, including liquid molten metals.
Fire sleeve is used as a protective sleeve on industrial hoses, hydraulic hoses, cables, wires, etc.
hydraulic hose protection sleevegenerally refers to two variations: An aerospace version is made with a braided fiberglass substrate and is commonly used in the aerospace industry. Its construction enables qualified hose assemblies to meet the SAE standards which have been established relative to the protection which this product provides.
An industrial version, constructed of a knitted fiberglass substrate is also available. Because it is less expensive it is more commonly used in hot industrial applications where this type of protection is needed. The industrial version will not meet the SAE standards.
Fiberglass sleeve—without the Silicone rubber coating—has a higher continuous temperature rating, up to 1000ºF or 540ºC and is available as a knitted or braided sleeve for protection of hoses and cables where molten splash protection or weld splatter protection is not required.
Fire sleeve is used for industry, aerospace, automotive, mining.
Send product request
Other supplier products
 |
Wire Loom Heat Shield | 1000°F / 537°C Continuous Exposure: Higher Intermittent Wire Loom Heat Shield Aluminum Coated Fiberglass Reflect Sleeveis made by braided f... |
 |
1.5mm aluminum foil fiberglass fabric cloth | 1.5mm aluminum foil fiberglass fabric cloth Application: 1.Used as the thermal insulating materials of steam heating pipelines, sound -proof materi... |
 |
Spark Plug Boot Protectors | Spark Plug Boot Protectorsprotect your expensive plug wire set’s performance and increase their lifetime.Spark Plug Boot Protectorfits most b... |
 |
fiberglass fire sleeve | 500°F/260°C Continuous Exposure: Higher IntermittentAS1072 GradeAerostylefiberglass fire sleeveAerostyle fiberglass fire sleevewas speciall... |
 |
Spark Plug Wire Heat Shield | Spark Plug Wire Heat Shieldprotect your expensive plug wire set’s performance and increase their lifetime.Spark Plug Boot Protectorfits most ... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
