fire sleeving
500°F/260°C Continuous Exposure: Higher Intermittent
AS1072 GradeAerostylefire sleeving
Aerostyle Fire Sleevewas specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.
Aerostyle fire sleevingcan withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Sheds splash immediately
Aerospace AS1072 Grade Fire Sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.
Withstands intense radiant heat and flame
Aerospace AS1072 Grade fire sleevingwill withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.
Aerostyle Fire Sleeveis constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.
Protect your personnel and cut your energy loss
Aerospace AS1072 Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
See all BSTFLEX fire sleeve here
Fire Sleeve With Metal Snap Closure
Send product request
Other supplier products
| fire protection heat sleeve | 500°F/260°C Continuous Exposure: Higher Intermittent fire protection heat sleeve Knitted high bulk glass fiber tube protection heat sleeve... | |
| black colored silicone fiberglass braided thermosleeve | 500°F/260°C Continuous Exposure: Higher Intermittentblack colored silicone fiberglass braided thermosleeve black colored silicone fiberglas... | |
| Silicone Rescue Tape Self-fusing Repair Clear self-fusing silicone tape | Silicone Rescue Tape Self-fusing Repair Clear self-fusing silicone tapeis the Original self-fusing silicone insulating & repair wrap. Self Fu... | |
| AL aluminum foil film laminated fiberglass cloth | AL aluminum foil film laminated fiberglass cloth Application: 1.Used as the thermal insulating materials of steam heating pipelines, sound -proof m... | |
| purple colored Fiberglass Exhaust Wrap | purple colored Fiberglass Exhaust Wrapfeatures a color coating which not only gives your vehicle that custom look, but it also increases the life o... |
Same products
| Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... | |
| ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... | |
| Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... | |
| Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... | |
| "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |






























