fiberglass fire sleeving

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

500°F/260°C Continuous Exposure: Higher Intermittent
AS1072 GradeAerostylefiberglass fire sleeving

Aerostyle Fire Sleevewas specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.

Aerostyle fire sleevingcan withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).

Sheds splash immediately
Aerospace AS1072 fiberglass fire sleevingwithstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.

Withstands intense radiant heat and flame
Aerospace AS1072 Grade fire sleevingwill withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.

Aerostyle Fire Sleeveis constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.

Protect your personnel and cut your energy loss
Aerospace AS1072 Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.

Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd

Other supplier products

	heat resistant fire sleeve with velcro	500°F/260°C Continuous Exposure: Higher Intermittent heat resistant fire sleeve with velcro heat resistant fire sleeve with velcrois d...
	Reflective aluminized fiberglass Heat Shield Sleeve	1000°F / 537°C Continuous Exposure: Higher Intermittent Reflective aluminized fiberglass Heat Shield Sleeve Aluminum Coated Fiberglass Refl...
	Titanium Exhaust Header Heat Wrap	1200°F / 648°C Continuous Exposure: Higher IntermittentTitanium Exhaust Header Heat Wrapis made from pulverized lava rock and stranded into...
	hydraulic tube protection thermosleeve	500°F/260°C Continuous Exposure: Higher Intermittent hydraulic tube protection thermosleeve Knitted high bulk glass fiber fire sleeve can ...
	pink colored fiberglass exhaust wrap	pink colored fiberglass exhaust wrapfeatures a color coating which not only gives your vehicle that custom look, but it also increases the life of ...

Same products

	Nylon Head Hot Dip Galvanized Spindle For Pin Insulator	Seller: Electric Powertek Company Ltd	Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm...
	ANSI C29.5 55-4M Pin Insulator for Bangldesh	Seller: Electric Powertek Company Ltd	The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ...
	Ground Wire Glass Insulator	Seller: Electric Powertek Company Ltd	Glass insulatorsare a crucial component in the insulation and support of overhead transmission li...
	Phenolic Thermal Insulation Board	Seller: Langfang Clear Chemical Building Materials Co., Ltd	Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c...
	"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK	Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr...