LAVA rock Exhaust Wrap
LAVA rock Exhaust Wrapis constructed from fragmentized lava rock that is extruded into the fibers to create a heat wrap that will give you strength and performance you expect from an exhaust header wrap.
When properly installed, the proprietary weave in our heat wrap will allow an even dissipation of heat so that it will not over insulate your pipings or create any hot spots.
LAVA rock Exhaust Wrap- twill promotes increased flow and keeps down underhood temperatures for improved performance and reduced vibration breakdown.
LAVA Exhaust Wrapis chemical and oil resistant that will not shrink or loose flexibility under extreme conditions. Titanium Exhaust Wrap is very easy to install and tightens down onto pipings without needing to be wet.
Lava Heat Wrap Tolerance:
Direct Contact Use Limit: 1800°F / 982°C
Max Contact Use Limit: 2500°F / 1371°C
See all exhaust wrap here
Titanium Exhaust Wrap - V
Send product request
Other supplier products
 |
T3 T4 Turbo Blanket Lava | BSTFLEX T3 T4 Turbo Blanket Lava Materials: -Silicone Impregnated Fiberglass Outer Shell -Calcium Magnesium Silicate Wool Inner Core (secured with ... |
 |
self fusing silicone rubber rescue repair tape self amalgamating tape 100mm transparent color | self fusing silicone rubber rescue repair tape self amalgamating tape 100mm transparent colorfor insulating generator coilsis the Original self-f... |
 |
Titanium Exhaust Header Heat Shield Wrap | 1200°F / 648°C Continuous Exposure: Higher IntermittentTitanium Exhaust Header Heat Shield Wrapis made from pulverized lava rock and strand... |
 |
High Temperature Silica Fabric | High Temperature Silica Fabricis suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C... |
 |
Adhesive Backed Silica Cloth | Adhesive Backed Silica Cloth is silica fabic with pressure-sensitive adhesive coating one side. Dependable severe-heat performance Suitable for us... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
