Molten Metal Splash Protection Fire Sleeve

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

500°F/260°C Continuous Exposure: Higher Intermittent

Molten Metal Splash Protection Fire Sleeve

Industry Fire sleeve is designed to protect hoses,wires and cables from the hazards of high heat and occasional flame.

Fire Sleeve protects continuously to 260°C/500°F and will withstand a molten splash at 1200°C/2200°F. Made of braided fiberglass yarns in a flexible substrate,it is then coated with a high grade silicone rubber.

Resistant to hydraulic fluids, Lubricating oils,and fuels, Silicone Sleeve insulates against energy loss in piping and hosing;protects employees from burns;and allows bunding of wires,hoses,and cables.

Molten Metal Splash Protection Fire Sleeveis the perfect cover to protect hydraulic hoses,pneumatic lines and wiring bundles.

Molten Metal Splash Protection Heat Sleevecan withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).

Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product

Proudly Made By BST Thermal Protection Products Co.,Ltd

Other supplier products

	purple colored Exhaust Wrap	purple colored Exhaust Wrapfeatures a color coating which not only gives your vehicle that custom look, but it also increases the life of the color...
	Silicone rubber glass fiber insulation sleeve	500°F/260°CContinuous Exposure: Higher Intermittent Silicone rubber glass fiber insulation sleeve Aerospace AS1072 Grade Fire Sleeve was sp...
	hydraulic hose heat protection fire sleeve with hoop and loop fastener	500°F/260°CContinuousExposure:HigherIntermittent hydraulic hose heat protection fire sleeve with hoop and loop fastener Braidedhighbulkfi...
	Heat Shield Wrap Sleeve	1000°F / 537°C Continuous Exposure: Higher Intermittent Heat Shield Wrap Sleeve Aluminum Coated Fiberglass Reflect Sleeveis made by braide...
	Aluminum Heat Shield Tape	Aluminum Heat Shield Tapewrapping is a fiberglass composite tape with a strong adhesive that wraps around your wires and hoses to protect from blaz...

Same products

	Nylon Head Hot Dip Galvanized Spindle For Pin Insulator	Seller: Electric Powertek Company Ltd	Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm...
	ANSI C29.5 55-4M Pin Insulator for Bangldesh	Seller: Electric Powertek Company Ltd	The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ...
	Ground Wire Glass Insulator	Seller: Electric Powertek Company Ltd	Glass insulatorsare a crucial component in the insulation and support of overhead transmission li...
	Phenolic Thermal Insulation Board	Seller: Langfang Clear Chemical Building Materials Co., Ltd	Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c...
	"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK	Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr...