thermosleeve fiberglass braided hose heat protective sleeve
1000°F / 520°C Continuous Exposure: Higher Intermittent
thermosleeve fiberglass braided hose heat protective sleeve
This Braided Fiberglass Biaxial Sleeving will conform to shapes with changing geometries. Great for use in prosthetics, hockey sticks and much more. It can be slid over a prepared mandrel or tube to create straight or tapered tubing. Braided Fiberglass Biaxial Sleeve can be increased from their base diameter up to 30% and decreased up to 70%.
Braided Fiberglass Biaxial Sleevingeasily and repeatedly expands open to fit over molding tools or cores. They can accommodate straight, uniform cross-section forms as well as non-linear, irregular cross section components.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
Send product request
Other supplier products
 |
fuel line protection thermo resistant sleeve | 500°F/260°C Continuous Exposure: Higher Intermittent fuel line protection thermo resistant sleeve Knitted high bulk glass fiber fire sleeve... |
 |
hose protection heat sleeve | 500°F/260°C Continuous Exposure: Higher Intermittent hose protection heat sleeve Industry Fire sleeve is designed to protect hoses,wires an... |
 |
Silica Fabric | high silica fabricis suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C), woven sil... |
 |
blue fiberglass exhaust wrap | blue fiberglass exhaust wrapfeatures a color coating which not only gives your vehicle that custom look, but it also increases the life of the colo... |
 |
LAVA Exhaust Wrap | TheLAVA Exhaust Wrapis constructed from fragmentized lava rock that is extruded into the fibers to create a heat wrap that will give you strength a... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
