adhesive coating High Temperature Woven Silica Tape
2000°F / 1093°C Continuous Exposure: Higher Intermittent
adhesive coating High Temperature Woven Silica Tape
A health conscious alternative to asbestos
High temperature resistant Slit Silica Tape with Adhesive Backing is a slit silica tape constructed from 96% pure SiO2 silica fiber, coated one side with a pressure sensitive adhesive backing that facilitates installation. The adhesive decomposes at high temperatures, leaving a perfectly tape-wrapped hose, cable or pipe.
Designed for severe heat environments
Suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C), Silica Flex Tape AB sets the standard for flexibility and minimum lineal shrinkage under high heat conditions.
Durability is further enhanced with a proprietary hydro-carbon coating, giving Slit Silica Tape with Adhesive Backing unmatched abrasion resistance and tensile strength.
Stock and custom sizes
Available in standard widths of 20mm---1000mm
Avaiable in standard thickness 0.75mm and 1.3mm.
Custom's width is available.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product.
Proudly Made By BST Thermal Protection Products Co.,Ltd
Send product request
Other supplier products
 |
Exhaust Manifold Turbo Blanket | BSTFLEX Exhaust Manifold Turbo BlanketShieldsMaterials: -Silicone Impregnated Fiberglass Outer Shell -Calcium Magnesium Silicate Wool Inner Core (... |
 |
Aluminized Woven Silica Textile Blanket | Aluminized Woven Silica Textile Blanket same high performance as ourWoven Silica Fabric. Suitable for use at 1800°F (982°C) and able to wit... |
 |
Water Tank Insulation Blanket | Water Tank Insulation Blanketis used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In parti... |
 |
Turbine Insulation Blankets | Turbine Insulation Blanketsis used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In particu... |
 |
Automotive Heat Protection Tubes | ThisAutomotive Heat Protection Tubesis made by aluminium, stainless steel, coated glass-fibre, PET-Fleece, paper, insulation material. 2 layer, 3 l... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
