Medical IT Isolated Power Panels System
Medical Isolated Power Panels System
The medical isolation power supply cabinet and insulation monitoring device are designed according to the different power distribution characteristics of the 2 types of medical places and are used to monitor the operating status of the medical IT system. Once a certain set of IT systems fails, electrical maintenance personnel can make a judgment within time and deal with it according to the on-site situation.
Types of Medical IT Isolated Power Panels for Healthcare Facilities System
ACLP10-24 Hospital Isolated Power System
DC Auxiliary Power Supply Medical Intelligent Insulation Monitor.
GGF Isolation Power Cabinet
Intelligent medical insulation monitor cabinet.
Hospital Isolation Panel Testing
The power supply of the IT system should use an independent power source, such as a distribution/isolation transformer, generator set, battery and UPS. Isolation transformers are usually used more often. After the isolation transformer, it is the IT system. There is no direct connection between the live conductor and the ground in the IT system. The exposed conductive parts of all equipment must be connected to the ground. In a single-phase IT system, the secondary side of the transformer does not matter whether the phase line or the N line is divided. They are all live conductors.
Established in 2003, Acrel Co Ltd. (Stock Code: 300286. SZ) are a high-tech enterprise concentrating on research, production, sales, and services. It mainly provides systemic solutions of energy efficiency management and electrical safety for users. "Acrel" is equipped with complete production lines from cloud platform software to sensors.
If you want to know more kinds of energy meter, please visit our website.
Other supplier products
|
|
ADW220 |
You can select the current input of the maximum four circuits. ADW2XX series wifi smart energy meterare connected by split core current transformer... |
|
|
ADL3000-E |
Acrel adl 3000three-phase din rail multifunction 7 moudules 0.5S kwh energy meter with RS485.
Technical Parameters of ADL3000-E
Input v... |
|
|
Energy Meter Application |
It has various functions such as remote measurement and remote signaling, status monitoring, event recording, history storage, etc., which can meet... |
|
|
AMC72L-E4 |
Three phase digital energy meterhave RS-485 port, Modbus-RTU protocol. Analog output, alarm output, and 3 phase smart meter' s switching input/outp... |
|
|
ATE Series Wireless Temperature Sensor |
Wireless temperature sensor for cable joint.
Model
NAME
SPECIFICATIONS
PHOTO
ATE100
Temperature Sensor
... |
All supplier products
Same products
