Hot Repairing Mix Gunning Mix Ramming Mix Converter refractory BOF refractories
SG-RB/RX series of hot repair mix is suited for using at trunnion area, taphole area and large working surface in converter. Taking high purity magnesia as main raw material, added and treated with unique organic bond, this mix enjoys some advantages like high adhesive strength, low smoke good flowability under high temperature condition and superior resistance to erosion/corrosion. It’s one of the best refractory materials for repairing the working lining of the converter. Upon getting thrown on the lining, SG-RB/RX mix will get softened quickly and spread over the worn out area and settle. With sintered layer on working surface fill up the gap and protect further erosion of the bricks, the service life of the converter hence can be extended. SG-ZL series of gunning mix is developed keeping in view the installation features of gunning materials and the steel making techniques of a converter. Superior magnesite and MgO-Cal based compounds are the main raw materials, treated with unique binders and other additives. SG-ZL series of gunning mix offers high adhesive strength, low rebound rate, good sinterability, and superior resistance to erosion/corrosion. They are optimal products for both cold and hot repair maintenance of converter lining. SG-ZL series of gunning mix is developed keeping in view the installation features of gunning materials and the steel making techniques of a converter. Superior magnesite and MgO-Cal based compounds are the main raw materials, treated with unique binders and other additives. SG-ZL series of gunning mix offers high adhesive strength, low rebound rate, good sinterability, and superior resistance to erosion/corrosion. They are optimal products for both cold and hot repair maintenance of converter lining. SG-DS series of ramming mix based on Alumina-Magnesia is made of corundum and fused Magnesite, and treated with additives. They have advantages of superior resistance to erosion/corrosion and easy installment. They are widely used as filling mix around seating block of the ladle and tundish bottom, and as casting mix around the converter mouth.
Other supplier products
|
|
Three Casting Block Shroud Mono Block Stopper Submerged Entry Nozzle Tundish Refractories |
Ladle shroud is the refractory to connect ladle to tundish. It stabilizes steel stream and protect the steel from oxidation and splashing. The seri... |
|
|
Refractories Tundish Sliding Plates Burned Slide Plates Alumina Zirconia Carbon Sliding Plate |
High-temperature burned slide plates have high strength, high erosion/ corrosion resistance, excellent thermal shock resistance and designed for lo... |
|
|
Refractories Lime Kiln Calcium silicate board Alumina Silica Board Fiber board |
Wide range refractories, Alumina bricks,Leight Weight Insulating Clay Brick,Calcium silicate board,Fiber felt,65% Al2O3 Arch Bricketc. For Lime Kil... |
|
|
Copper Nickel Lead Zinc Refractory Precast Block Alumina SiC Precasts Matte Chute |
The series precast block,tundish, alumina-SiC precast mutte chute show the features of high strength ,good wear resistance, strong erosion resistan... |
|
|
Converter refractories BOF refractory Slag Limiting Ball Slag Arrester |
During the tapping process of the Converter, the molten steel level will decrease gradually. When it reaches a critical value, swirls will emerge i... |
All supplier products
Same products
