GD-150 Rebar Upset Forging Machine,GZL-45 Rebar Thread Cutting Machine
Model Semi-automatic GD-150
Dia. of Upsetting Rebar 16-40mm
Oil Pressure Flux 5.6L/min
Max Pressure 63 Mpa
Voltage 380V 50Hz
Power 4kw
Net Weight 620kgs
Dimension 1225*570*1100mm
Model Semi-automatic GZL-45
Dia. of Threading Rebar 16-40mm
Rotation Speed 32r/min
Reverse Rotation Speed 46r/min
Voltage 380V 50Hz
Power 2.5/3.0kw
Oil Pump Power
Net Weight 590kgs
Dimension 1325*570*1070mm
Dia. of Upsetting Rebar 16-40mm
Oil Pressure Flux 5.6L/min
Max Pressure 63 Mpa
Voltage 380V 50Hz
Power 4kw
Net Weight 620kgs
Dimension 1225*570*1100mm
Model Semi-automatic GZL-45
Dia. of Threading Rebar 16-40mm
Rotation Speed 32r/min
Reverse Rotation Speed 46r/min
Voltage 380V 50Hz
Power 2.5/3.0kw
Oil Pump Power
Net Weight 590kgs
Dimension 1325*570*1070mm
Product Feature
High tensile strength, stable quality, easy to operate, fast speed, wide application, good economic returns etc.
High tensile strength, stable quality, easy to operate, fast speed, wide application, good economic returns etc.
Product Specification/Models
GD-150
GZL-45
GD-150
GZL-45
Application
Use Rebar Upset Forging Machine to forge rebar end, and then use Thread Cutting Machine to cut thread on forged rebar end, finally connect threaded rebar and coupler.
Use Rebar Upset Forging Machine to forge rebar end, and then use Thread Cutting Machine to cut thread on forged rebar end, finally connect threaded rebar and coupler.
Payment
TT, LC
TT, LC
Delivery
within 3 days
within 3 days
Origin
Beijing, China
Beijing, China
Minimum Order
1 set
1 set
Packaging
plywood case
plywood case
Send product request
Other supplier products
 |
AGW40 Rebar Bending Machine, AGW50 Rebar Bending Machine, | Model AGW50(A)Bending Diameter Plain round bar: 6-40mm 6-50mmribbed rebar:6-36mmSpecification of working disk 420mmSpindle speed could adjust to 5-... |
 |
Asphalt Crack Sealing Machine | Product DescriptionModel FGF-50Fueltype LiquefiedpetroleumgasAsphaltpumpmode CB-B2.5Volumeoffeedtank 50LStartway ByhandPower YamahaET950Netweight 1... |
 |
Concrete Truss Screed | Product DescriptionModel ZP-90Power 9HP/5.5kwWorking Width 8m-11mWorking Depth 260cmFrequency 70HZStandard Section 1000/2000mm Product FeatureHONDA... |
 |
Rebar straightening and cutting machine | Product DescriptionModel GT4-14Straightening Scope 4-14mmStraightening Speed 500 ~ 900m/sAuto Cutting Length 300-8000mmQuantity of Cutter 3 setsMot... |
|
|
GD-150 Rebar Upset Forging Machine,GZL-45 Rebar Thread Cutting Machine | Model Semi-automatic GD-150Dia. of Upsetting Rebar 16-40mmOil Pressure Flux 5.6L/minMax Pressure 63 MpaVoltage 380V 50HzPower 4kwNet Weight 620kgsD... |
Same products
 |
AEMK 588 Loader | Seller: AEMK MACHINE CO.,LTD | Cab Height :2670mm Overall Dimensions ( L * W * H ):5700*2000*2670mm Front Wheel Counterweight ... |
 |
Quick Change Worktable | Seller: Nextas Co.,Ltd | Quick Change Worktable Zero Point Pneumatic Chuck Zero Point Positioning Datum System NE... |
 |
Self Centering Vise | Seller: Nextas Co.,Ltd | Self Centering Vise Key Advantages High precision: repeatability as tight as ≤ 0.005 mm ... |
 |
BDS Positioning Chuck | Seller: Nextas Co.,Ltd | BDS Positioning Chuck Self Centering Vise Self-centering vise is a type of workholding tool that... |
 |
Quick Change Pallet System | Seller: Nextas Co.,Ltd | Quick Change Pallet System Quick Change Pallet System Quick Change Pallet System delivers m... |
