Desander
All supplier products
Desander
SolidControlEquipment
Desander is the second equipment in solids control system，it is used to separate solid phase particles whose diameter is 40～75μm.
（1）Select Special wear-resistant polyurethane material hydrocyclones.
（2）Inlet tangential feeding,smooth transition ,which help to improve separation efficiency and have a wide range of separation sizes.
（3）Symmetrical feeding design can make the liquid distribution to be more reasonable and stable.
（4）Size of the underflow hole of the hydrocyclone can be adjusted in order to control the handling capacity of the equipment.
（5）Different specifications and quantities of hydrocyclones can be matched according to the handling capacity that customer required.
Desander Parameters
|
Model |
DCCSQ250×1 |
DCCSQ250×1 |
DCCSQ250×2 |
DCCSQ300×2 |
|
|
Treating Capacity |
90m³/h396GPM |
120m³/h528GPM |
240m³/h1056GPM |
300m³/h1320GPM |
|
|
Separation Size |
40～75μm |
||||
|
Cone Size |
10"（250） |
10"（250） |
10"（250） |
12"（300） |
|
|
Cone Number |
1 |
1 |
2 |
2 |
|
|
Pressure |
|
||||
|
Matching Pump |
DCSB5×4-12-22kW |
DCSB6×5-12-30kW |
DCSB8×6-13-55kW |
DCSB8×6-13-55kW |
|
|
Electric Specs |
380V/50HZ or 460V/60HZ or Customized |
||||
|
EX standard |
Ex dⅡBT4 |
||||
|
Inlet Diameter |
DN150 |
||||
|
Outlet Diameter |
DN200 |
||||
|
Matching Shaker |
Screen Specification |
600×1600mm,120-300 mesh |
|||
|
Screen Type |
Soft Hookstrip |
||||
|
Motor Power |
|||||
|
Dimension |
1200×1200×2000mm |
1470×1400×2000mm |
1500×1750×2020mm |
||
|
Weight |
585kg |
615kg |
610kg |
||
|
Remark |
|
||||
Send product request
Other supplier products
 |
Slurry Plant for CBM | Slurry Plant for CBM MudSystem CBM (is short for coalbed methane) mud circulation system can effectivecontrolthe solid phase content in the mud. ... |
 |
Flare Ignition Device | Flare Ignition Device SolidControlEquipment Flare igniter is the matching solid control equipment for drilling system. It can dispose the tail ga... |
 |
Mud Tank | Mud Tank SolidControlEquipment Mud tank is a container, typically made of square steel tube and steel plate, to store drilling fluid on a drillin... |
 |
Jet Mud Mixer | Jet Mud Mixer SolidControlEquipment Jut mud mixer is a specialized solids control equipmentused for configuring and aggravating drilling fluid , ... |
 |
Decanter Centrifuge | Decanter Centrifuge SolidControlEquipment Drilling fluid centrifuge is used for recovering barites, removing small solid particles, reducing soli... |
Same products
 |
YZ Metallurgical Double-Girder Overhead Crane | Seller: Hefei Chunhua Hoisting Machinery Co., Ltd. | Product Introduction The YZ Metallurgical Double-Girder Overhead Crane is a heavy-duty overhead ... |
 |
YZD Metallurgical Double-Girder Overhead Crane | Seller: Hefei Chunhua Hoisting Machinery Co., Ltd. | Product Introduction The YZD Metallurgical Double-Girder Overhead Crane is a heavy-duty overhead... |
 |
LDP Metallurgical Single-Girder Overhead Crane | Seller: Hefei Chunhua Hoisting Machinery Co., Ltd. | Product Introduction The LDP Metallurgical Single-Girder Overhead Crane is a specialized single-... |
 |
LHE Electric Hoist Double-Girder Overhead Crane | Seller: Hefei Chunhua Hoisting Machinery Co., Ltd. | Product Introduction The LHE Electric Hoist Double-Girder Overhead Crane is an overhead lifting ... |
 |
LDC Electric Single-Girder Overhead Crane | Seller: Hefei Chunhua Hoisting Machinery Co., Ltd. | Product Introduction The LDC Electric Single-Girder Overhead Crane is a low-headroom overhead li... |
