285 Ridge Cap Forming Machine
Technical Parameters
1Suitable material Type Colored steel sheet
Thickness (mm) 0.5-0.55
Yield Strength (Mpa) 230-300Mpa
Width (mm) 418
Wt of the Coil (t) 3
OD Φ1350mm
ID Φ508mm/Φ610mm
2 Material of rollers No45 chromeplate
3 Forming Speed (m/min) 15-20 excluding cutting time
4 Power Source AC380V ,50 Hz, 3 Phase Will be according to actual design
5 Total power About 8KW Will be according to actual design
6 Dimension (L×W×H, mm) See to the profile Will be according to actual design
Other supplier products
|
|
CNC aluminum extrusion profile with surface treatment |
As well as the CNC aluminium machining,Maxtech also can do the surface treatment for the aluminum extrusion profile.It can make the CNC aluminum ma... |
|
|
146 Roll Forming Machine for ridge cap |
Main Technical Parameter1 Suitable material Type Colored coating steelThickness (mm) 0.55Yield strength (Mpa) 345MpaWidth (mm) 4002 Forming Speed... |
|
|
CNC metal parts machining service |
Our materials come from suppliers who share our commitment to quality.So using MAXTECH takes the guesswork out of CNC center machining milling se... |
|
|
Light Steel Keel Roll Forming Machine |
Technical Parameters1 Suitable material Type Galvanized sheet plateThickness (mm) 0.85-1.6mmTensile strength (Mpa) 235-300MpaWidth (mm) Refer to ... |
|
|
CNC lathe machining parts |
Besides the cnc machining services, we also provide lathe services. We often apply our lathe capabilities to non-bulk orders of parts or hardware... |
All supplier products
Same products
