Discontinuous PU sandwich panel
The product line is consisted of the press and the rail stands. Two worktables are to move into the press and the other two stay on rail stands. Initially, put the top and the bottom facing sheets inside of mould frames and then do the necessary sealing work. After that, feed the worktables into the press. When worktables inside the press moves out orderly, the other two feed in at the same time. Upon the finish of feeding, the press will close and slant at a angle, waiting for the injection PU raw materials from the PU mixing head into different panels. Meanwhile materials start foaming and curing. At this time, mould frames on worktables moved out can be opened and the finished products can be unloaded to get ready for next production cycle.
Advantages of Discontinuous PU Sandwich Panel:
- Panels are produced faster than conventional ones: demoulding times are 30-35% shorter.
- The average distribution foam - at equal overall density - is better than in conventional panels.
- Scrap parts - and all relevant disposal or repairing costs - are virtually eliminated nice and clean quality panels are supplied, with very high mechanical properties and state-of-the-art insulation efficiency.
Technical Datas of Discontinuous PU Sandwich Panel:
Raw material |
Color coated steel coil or Aluminum sheet |
Coil thickness |
|
Coil width |
1060-12500mm |
Line speed |
|
Core density |
About 40(Kg/m2) |
Panel length |
1~12mm |
Panel width |
1,000mm |
Panel thickness |
40~150mm |
Foam system |
PU or PIR rigid foam |
Foam density |
approx 35~45 kg/m3 |
Inner height or building |
6m |
Thermal conductivity |
|
Tensile strength |
300–500 (KP a) |
Water vapor transmission |
|
Bending strength |
550–560 (KP a) |
Stable operating temperature |
-40to+50(°c) |
Required man power PU line |
4-6 workers |
Send product request
Other supplier products
Color Steel Sandwich Panel Production Line | Introduction of color steel sandwich panel production line: The continuous production line for rigid polyfoam laminated panel with color steel f... | |
Three Components Low Pressure Polyfoam Injection Machine | Introduction of polyfoam injection machine: This three components low-pressure polyfoam injection machine is especially suitable for manufactur... | |
Reaction Injection Machine | Reaction Injection Machine Descriprion: The reaction injection machines include phenolic injection machine, two components PU form injection ma... | |
EVA Foam Cutting Machine | Introduction:EVA foam cutting machine is applicable to cut all kinds of flexible material like EVA and rigid foam. It is widely used in the produ... | |
Normal Temperature Elastomer Polyether Injection Machine | Technical Parameters of Normal-Temperature Type Elastomer Polyether Injection Machine: Mixing Ratio Material A: Material B =100:90 ... |
Same products
STAINLESS STEEL SPIRAL WELDED PIPE PRODUCTION LINE | Seller: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | The stainless steel spiral welded pipeunit adopts front-swing intermittent production, which is a... | |
Spiral washing and stone washing machine | Seller: Advanced Machinery Manufacture Co., Limited | Product Features: Spiral stone washing machine is a kind of sand washing machine, which is also d... | |
Push Ball Valve | Seller: Zhejiang Carbo Bronze Co., LTD | Because the push to connect flanged bronze ball valve is designed and manufactured with a push ro... | |
Drum screen vibrating screen Cement slurry high frequency screening machine | Seller: Advanced Machinery Manufacture Co., Limited | Product Features: 1. Simple structure, small maintenance, small investment, low vibration, and no... | |
Single cylinder hydraulic cone machine | Seller: Advanced Machinery Manufacture Co., Limited | product features: 1. Wide range of applications: It can break hard rocks, and the same host can o... |