Large Flow Rate Low Pressure Polyurethane Injection Machine
Introduction:This large flow rate low-pressure polyurethane injection machine developed on our own is a kind of low-pressure injection equipment with the throughput as much as 6, 000 gms/sec, which is suitable for making large block-type flexible, half-rigid, and rigid foam products and is widely used in the production of automobiles, building and industries needing insulating materials.
The polyurethane injection machine is used for making large PU products such as highly-elastic foam mattress, cubic thermoplastic foam ceilings for vehicle use, etc. It is accurate in metering, uniform in foaming and stable in quality and can completely substitute manual mixing and foaming method, greatly increasing the working efficiency.
Technical Parameters of Polyurethane Injection Machine:
|
Mixing Ratio |
A:B=2.5:1 |
A:B=1:1 |
or in accordance with technical requirement |
|
Throughput Range (gms/sec) |
1000～30003000～6000 |
1000～30003000～6000 |
two scales |
|
Volume of Loading Tank (L) |
500 |
500 |
|
|
Revolution of Mixing Head (rpm) |
3500-4500 |
3500-4500 |
|
|
Program-controlled Points |
12 |
12 |
40 points or 200 points if on request |
|
Viscosity Requirement (CPS) |
＜2000 |
＜2000 |
|
|
Temperature Adjusting Range (℃) |
0-50 |
0-50 |
|
|
Total Power (kw) |
40 |
40 |
9kw for heating |
|
Form of Mixing Head Assembly |
Frame type |
||
|
External Dimensions (m) |
|||
Send product request
Other supplier products
 |
Cold storage panel line | The line can make PU cam lock panel, its standard width is 960mm and the length in the common is less than 6.5m. It can make small cold room, pan... |
 |
High Temperature Elastomer Dispensing Machine | Elastomer injection machine of high temperature type Detail Info: The high temperature elastomer dispensing machine (polyurethane dispensing mac... |
 |
Rigid Foam Panel Production Line | Description:The rigid foam panel production line mainly includes PU sandwich panel production lines used for air duct, roof, wall, garage door an... |
 |
Two Components Low Pressure PU Form Injection Machine | Constituents of PU Form Injection Equipment:Our PU form injection machine is consisted of mixing head, loading tanks, metering pump unit, hot-wat... |
 |
Flame Lamination Machine | Introduction:The advent of flame lamination machine is demanded by further-processing requirement of textile. Nowadays the development of cap-mak... |
Same products
 |
Durable Cantilever Bar Racks On Sale | Seller: Guangzhou Maobang Storage Equipment Co.,Ltd | MAOBANG Heavy Duty cantilever storageRack is specially designed to store long or varied load unit... |
 |
Material handling auxiliaries | Seller: Nanjing KY Chemical Machinery Co., Ltd. | Material handling auxiliaries include material storage and transportation, mixing and metering, t... |
 |
Catalyst System & Auxiliary | Seller: NANTONG REFORM PETRO-CHEMICAL CO.，LTD | Custom catalystsystem & auxiliary can industrialize many new chemical reactions to provide mo... |
 |
Golfcart Battery | Seller: Shenzhen Worldpower Energy Storage Technology Co.,Ltd | The Golfcart Battery is an essential and dependable energy solution specifically tailored for gol... |
 |
Electric Scooter Battery | Seller: Shenzhen Worldpower Energy Storage Technology Co.,Ltd | A cutting-edge power solution for your electric scooter. Engineered with advanced technology, our... |
