.

JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts

JMZ-1-3.0A rubber isolation mounting feetbelongs to the JMZ-1 series. It adopts the structure of double spring and special friction plate. It has good impact resistance and a 3 kg maximum rated load. It can vibrate isolation in any direction. This type of rubber mounting feethas a wide operating frequency range and can be used in harsh environments such as high and low temperature and chemical pollution. It has good performances such as anti-humidity, anti-salt fog, high and low-temperature resistance, mold resistance and long service life.

With the rapid development of modern industrial engineering, the various manufacturing machine, transportation machine are all developing to high speed, high efficiency, high precision, and automation. However, with the increase of equipment's power and speed, the intensity of the vibration source in engineering practice is increasing constantly, the harm is also obvious because of vibration and noise. Vibration does the great harm to operators, precision instruments, machinery equipment and architectural structure, at the same time, vibration and the noise is also bad for people's living condition and physical and mental health. Therefore, harm from vibration and noise is drawing more and more attention from researchers from various countries.

Vibration and noise are harmful in most cases, vibration hazards are regarded as one of the seven environmental hazards. The hazards of vibration and noise can be divided into the following aspects:

When vibration is over certain strength, it will do harm to human bodies. People will have insomnia, lumbago, backache, fatigue, impotence, headache, dizzy, drowsy, gastro-intestinal, low appetite and weak attention id they are under the environment of large vibration and noise for a long time, it is also easy to make mistakes and technical error, what's worse, it will make people's senses blunt and cause physical illness.

Vibration brings unsafe factors to buildings when vibration is acting on buildings, that is to say, mechanical energy is acting on buildings, it will create deformation. Vibration makes bigger deformation and setting of the ground. When vibration frequency and building structure frequency is the same or similar, the harm will be more serious, it even makes buildings fall down. Vibration will cause uneven sedimentation and damage plant and equipment if the basic geological condition of equipment is bad.

At present, machinery equipment and power is larger and larger and its variety is more and more diversified, after the vibration from machinery equipment is transferred to basics, floors, walls and other structure, vibration will transfer to other room by elastic waves and create vibration between neighboring air, so the vibration of objects will be spread to everywhere in the form of sound wave, that is what we called noise. Ferroconcrete and metal are the good material for isolating air noise, but it makes no differences for solid state noise, sometimes a pump can break the peace of the whole building.

Vibration breaks the accuracy, reliability and sensitivity. If the instruments and apparatus are near the strong vibration source, vibration will have the different influence on them. Influence on the normal operation of instruments and influence on the accuracy of the scale of apparatus reduces the precision of measurement, what's worse, it will make instruments out of order, especially for electric instruments.

Therefore, how to decrease the harm of vibration and noise efficiently is a very important issue for the industrial development all over the world, vibration control is the most direct way to decrease the harm of vibration and noise in engineering practice, so the research of vibration control is necessary for controlling vibration and noise.

If you are looking for reliable anti vibration mounts factory, contact HOAN now!

This GH 30G military defense vibration isolators model is designed originally for the protection of the vibration shock occurred in the moving of Tank in the military activities. In order to offer the fluent and persistent signal communication received by the soldiers during the military defense activities to ensure the received information is correct and in-time.

There are 6 models included in the GH 30G military defense vibration isolators, which has the Pz static load from 10 N (1.02 kg) to 60N (6.12 kg).

Comparing with other mode wire rope isolators, the GH-10A model anti vibration mountscan provide better cost-effective, simultaneous shock and vibration attenuation than any other traditional isolators.



Send product request

To: Xi\'an Hoan Microwave Co., ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

JMZ-T Rubber Vibration Damping Sandwich Mounts
JMZ-T Rubber Vibration Damping Sandwich Mounts The JMZ-T seriesvibration damping sandwich mountsis the new designed model, which is designed especially for the military use. Comparing with the w...
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount JMZ-1-2.0B rubber vibration absorber belongs to the JMZ-1 series. It adopts the structure of double spring and special friction plate. It has good ...
Wire Rope Isolator
Wire Rope Isolator Wire rope vibration isolator was developed successfully by America in the 1970s, it is a typical nonlinear , its damping force characteristics have...
GRY-100A Stainless Steel Vibration Mount for Industrial Shipbuilding/Camera/Cinema Shock Vibration
GRY-100A Stainless Steel Vibration Mount for Industrial Shipbuilding/Camera/Cinema Shock Vibration The GRY-100A marine shipbuilding vibration mount is made by the 30 loops 2.4mm diameter wire rope winded in the two mounting bars. The max static l...
GRY-100A Stainless Steel Vibration Mount for Industrial Shipbuilding/Camera/Cinema Shock Vibration
GRY-100A Stainless Steel Vibration Mount for Industrial Shipbuilding/Camera/Cinema Shock Vibration The GRY-100A marine shipbuilding vibration mount is made by the 30 loops 2.4mm diameter wire rope winded in the two mounting bars. The max static ...
All supplier products

Same products

SATELLITE COMPONENTS PRODUCT
SATELLITE COMPONENTS PRODUCT Seller: Chang Guang Satellite Technology Co., Ltd. Cubesat Componentsand Satellite ComponentsProduct It is used for mechanical connection between...
4mm Orange Circular Cable 3 Core+ Earth 0.6-1kv
4mm Orange Circular Cable 3 Core+ Earth 0.6-1kv Seller: Guangdong Jinlianyu Cable industrial Co.,Ltd 4 mm orange armoured cableare widely used in Australia and New Zealand marktet following the stan...
GYFXBY Flat Fiber Optic Cable
GYFXBY Flat Fiber Optic Cable Seller: Hangzhou Tuolima Network Technologies Co., Ltd The structure of flat fiberoptic cable is to sheath single-mode or multi-mode optical fiber into ...
DFGH Magnetic Cylinder Sensor
DFGH Magnetic Cylinder Sensor Seller: ALIF TECH. CO., LTD. DFGH series magnetic sensor DFGH series is suitable for SMC, AIRTAC 4φ diameter C-shaped g...
G330 VOCs Gas Thermal Imaging Camera
G330 VOCs Gas Thermal Imaging Camera Seller: Zhejiang ULIRVISION Technology Co., Ltd. Overview of G330 VOCs Gas Optical Infrared Thermal ImagingCamera VOCs gas imaging camerais a non...