electric lifting winch
The use of ground grinding security technology
(1) the ground should be put on the flat, accessibility, and fixed tightly, prevent the ground plane to move or skewed.
(2) run one end of the rope to lower by grinding core pulling, and suction clockwise around the core grinding, the other end by the upper half of the grinding core leads.
(3) ran to the derivation of the rope should be guide pulley, may not directly lead to high.
(4) discover the rope phenomenon, immediately stop, manage their ropes rear can continue to promote ground grinding work.
(5) ground on the ground should be equipped with prevent grind core reverse braking mechanism, prevent the core grinding reverse cuts.
(6) ground when stop running, brake should be good, and will run the rope and pull on the rope on the lock, the operator can leave.
(7) many operation shall have a clear division of responsibilities, personal command, the same action, it is forbidden to irrelevant personnel stay in run on either side of the rope and pulled tight rope.
Other supplier products
|
|
Towing Smooth wire mesh grip protecting |
These Grip offer a flexible eye and double weave stainless steel wire construction for regual load pulls.Always read Breaking Strength,safety and t... |
|
|
SKL-4 Aluminum alloy cable grip |
This aluminum alloy conductor gripper serves to adjust the sag and tighten the overhead line conductors. It is forged from high strength aluminum a... |
|
|
Triple Corner Roller |
1.Application: Used for guiding cable to turn and set free. and used for setting power cable and communication cable in trenchers or on ground. 2.... |
|
|
Hydraulic type cable dispenser |
Application: Suitable for cable tray support. Hydraulic lifting, casters at the bottom, easy to move. For line construction, extending wire shelvi... |
|
|
Straight line |
The cable roller can protect the cable, at the same time, cable block also can effectively reduce the friction of the cable, improve the constructi... |
All supplier products
Same products
