BZ-65C/85C/105C Battery Powered Cable Cutter for Al/Cu cable
1.a double piston pumpwhich is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
2.which returns the piston into its starting position when the maximum operation pressure is reached.
3.allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston& die when the button is pressed.
4.around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
5.do neither have a memory effect nor self-discharge.Even after long periods ofnon operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
6.If a deviation from the set operation pressure or low battery charges is identified,an acoustic signal.
Other supplier products
|
|
YQK-70 fast line pressing pliers |
Hydraulic crimping pliers：Monolithic crimping pliers, crimping pliers need to separate with the corresponding pump, general suitable for electric o... |
|
|
K95 klauke integral mechanical crimping pliers |
Manual type crimping pliers：Using high and low two levels of plunger pump driven design, operation fast and effort; System is equipped with safety ... |
|
|
THC-45 Safety hydraulic wire rope cutter |
FEATURES THC-45 Safety hydraulic wire rope cutter 1.Flip top cutting head rotates 350degree 2.Two stage hydraulic to reduce cutting cycle automatic... |
|
|
Cable Drum Lifting Jacks |
These A-Frame cable stands with hydraulic bottle jacks are a compact solution for spooling heavy drums of power and data cable or conveyor belts. T... |
|
|
TC-250 patchwork cutters |
Feature: TC-250 hand cable cutting tool with forging , long life span The handle is made of high tensive aluminum alloy, the knives are made by for... |
All supplier products
Same products
