WATER METER SHAFT
The shell is made of cast iron. After water comes out from the water inlet, it passes through the lower annular space of the shell, which is called "lower ring chamber". On the top of the annular space, there is a "upper ring chamber" connected with the water outlet. The bottom of the sleeve has a filter screen with small holes to filter out the impurities in the water. There are two rows of round holes on the side of the sleeve. The position of the holes is just opposite to the upper and lower ring chambers of the shell. The inner core is divided into upper, middle and lower layers. The upper layer can be seen from the glass window, with only the pointer and dial. There is a plastic wheel in the lower layer. There are many plastic blades on the edge of the wheel, which is called "impeller".
The position of the impeller is just in the rotary flow formed by the hole in the lower layer of the casing pipe. The water flow impacts the blade around the wheel, and generates torque to make the impeller rotate. The bigger the faucet is, the faster the flow is, and the faster the impeller will turn.
Thus, the water meter shaftneeds to be corrosion-resistant, non rusting, water pressure resistant, relatively high hardness and no deformation. Tungsten steel water meter shaft has these advantages and perfectly replaced the steel shaft.
Xiamen Betalent Carbide Co., Ltd is a professional cemented carbide manufacturer. We provide Carbide Insert, Carbide End Mill, carbide product, carbide cutting tools for saleand so on. Want to know more? Please contact us.
Send product request
Other supplier products
 |
CENTER DRILL BIT | Center finder drill bitis a common tool in machining, which plays an important role in actual production. The first application of center drill was... |
 |
SOLID CARBIDE ROD | Solid carbide rodis the most general shape of tungsten carbide blank material for cutting tools. And for cutting tools application, tungsten carbi... |
 |
3 FLUTE, 16MM FLAT CARBIDE END MILL, MILL CUTTER FOR ALUMINUM | 3 FLUTE, 16MM CARBIDE END MILL, MILL CUTTER FOR ALUMINUM Grain size Cutting dia. 16mm Grade BT50 ... |
 |
2 FLUTE, 0.6 MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER | 2 FLUTE, 0.6 MMENDMILL, SMALL DIAMETER MILL CUTTER Grain size Cutting dia. Grade BT55 Shank dia.... |
 |
ROUGHING END MILL | ROUGHING END MILL There are four carbide grades applied to general flat end mills: BT45, for milling materials of which hardness range from HRC4... |
Same products
 |
Matrix Body PDC Bit For Oil Well Drilling Hard Rock | Seller: Cangzhou Great Drill Bits Co.,Ltd. | Overview of Matrix Body PDC Bit GM1605T Matrix body PDC bit GM 1605T is made by Tungsten carbide... |
 |
Matrix Body PDC Bit | Seller: Cangzhou Great Drill Bits Co.,Ltd. | GREAT, as one of the professional drill bit manufacturers in China, we design and manufacture a w... |
 |
Longer Working Life Hybrid Drill Bits Improve Drilling Effeciency | Seller: Cangzhou Great Drill Bits Co.,Ltd. | Overview of Hybrid Drill Bit Hybrid drill bits are compounded by the PDC fixed cutting and the r... |
 |
Three Blade Wings Drag Rock Drill Bit For soft formations | Seller: Cangzhou Great Drill Bits Co.,Ltd. | Overview of Drag Bit Drag bitare manufactured from forged high-quality alloy steel and hard allo... |
 |
Well Drilling Equipment Crocodile PDC Reamer for Horizontal Drilling | Seller: Cangzhou Great Drill Bits Co.,Ltd. | Overview PDC Reamer The PDC Reamersmanufactured by GREAT drill bit will be your best choice to d... |
