MFD Matched Linear Fiber Array
MFD Matched Fiber Array
Regular 10um fibers can hardly been coupled efficiently when they are used to align with silicon waveguild. Therefore, fibers with small mode field diameter (MFD) come into use. It can be fusion spliced to SMF28 fiber, working as a connecting bridge between regular 10um fiber and silicon chip. MEISU's mfd optical fiberarray can be UHNA fiber spliced to regular sized SM fiber or PM fiber, keeping the splicing point as close as 7mm to the fiber array facet.
MFD Matched Fiber Array Features
Accurate fiber core spacing
Matched from 10um to 3~5um
Customized configurations
MFD Matched Fiber Array Specifications
|
Parameter |
Unit |
Value |
|||||
|
V-grooveMaterial |
- |
QuartzorPyrex |
|||||
|
Maxchannelcount |
ch |
32 |
|||||
|
MFD@1310SMF |
μm |
||||||
|
MFD@1550SMF |
μm |
||||||
|
MFD@1310PMF |
μm |
||||||
|
MFD@1550PMF |
μm |
||||||
|
SplicingLoss |
dB |
||||||
|
PER |
dB |
＞18 |
|||||
|
mm |
5 |
||||||
|
KeyOrientation |
- |
Slow/FastAxisorcustomerspecified |
|||||
|
- |
±3 |
||||||
|
OperatingTemperature |
℃ |
0~+70 |
|||||
|
StorageTemperature |
℃ |
-40~+85 |
|||||
How It Works
MFD matched Fiber Array is assembled by fusing two types of fiber with different MFD (Mode Field Diameter) together, to realize optical transmission from ordinary single-mode fiber to small fiber mode field, polarization maintaining optical fiber to ordinary single mode fiber and single mode fiber to multimode optical fiber, etc.
Send product request
Other supplier products
 |
2D Matrix Fiber Array | Two-dimensional M * N fiber array is a kind of fiber component that has many fibers arranged orderly and accurately in two-dimensional form, with a... |
 |
Polarization Maintaining Optical Fiber Array | MEISU's pm fiber arrayis a row of PM fiberof any specified orientation (error< 3 degree). The most common orientation of this polarization maint... |
 |
Linear V Groove Fiber Array Unit | Linear Fiber Array Products One dimensional linear fiber array is made by placing M / MM / PM fibers on a V-grooved substrate at specified spacin... |
 |
HT (260℃) High Temperature Fiber Optic Connector Sensor | HT (260℃) High Temperature FiberOptic Connector Sensor High temperature resistant connector uses special fiber with high temperature survivable co... |
 |
2D Optical Fiber Collimator Array | Traditional optical fiber collimatoris the basic component of optical fiber communication device. However, with the development trend of integratio... |
Same products
 |
V-15-1C25 basic plunger model Micro Switch | Seller: Yueqing Yongde Electric Co., Ltd. | V-15-1C25 basic plunger model Micro Switch ■High accuracy of action position; ■Good shock resis... |
 |
T4N-4131 Safety Limit Switch | Seller: Yueqing Yongde Electric Co., Ltd. | T4N-4131 Safety Limit Switch ■Forced open action device(NC contacts only), it can disconnect the... |
 |
TSA-001 sealed plunger actuator Limit Switch | Seller: Yueqing Yongde Electric Co., Ltd. | TSA-001 sealed plunger actuator Limit Switch ■Stainless steel idler wheel, punch and spring; ■S... |
 |
TZ-8104 roller lever actuator Limit Switch | Seller: Yueqing Yongde Electric Co., Ltd. | ■Double-circuit type of limit switch. ■Compact new design approximately 1/3 the size of TMAZTZ v... |
 |
TZ-8108 adjustable roller lever Limit Switch | Seller: Yueqing Yongde Electric Co., Ltd. | TZ-8108 adjustable roller lever Limit Switch ■Double-circuit type of limit switch. ■Compact new... |
