Mechanical Push Pull Cable Sleeve
Product Name: Mechanical push pull cable sleeveUsage: Protective sleeve for mechanical control inner cableConstruction: Three layered sleeveSize: ID1.6*OD4.0mm,Website:, ID2.1*OD5.0mm, ID3.0*OD6.0mm,ID4.0*OD8.0mm, ID5.0*OD9.0mm etc, all sizes customizedMaterial: Inner tube: HDPE, PA6, PP, POM, PTFE etc. CustomizedFlat steel wires: carbon steel, galvanized or SUS304Outer jacket: PA6, PE, PP, PTFE etc. CustomizedNo.1.6-4-1P2.1-5-2P3-6-2P4-8-2P5-9-2P1Ø 1.6mmØ 2.1mmØ 3mmØ 4mmØ 5mm5Ø4.0mmØ 5.0mmØ 6mmØ8mmØ 9mmA materialPEPEPEPA6POMB materialSWRS 62A
galvanizedSUS 304SWRS 62A
galvanized45#
carbon steel45#
carbon steelC materialPPPPPPPA6PA6Features: 1.3 layered control cable sleeve2.High strength3.Can bear pressure and impact4.Guarantee no deformation of inner tube5.Increase of service lifeApplication:Push pull cable sleeve is a protective sleeve of control steel cable for mechanical control purpose, for instance, car gear shifting, accelerator control, brake, boat rudder control etc. Our push pull cable sleeves and inner wire ropes have been in mass production for RENAULT, HYUNDAI ELANTRA & SONATA, KIA K5, VOLKSWAGON POLO, CHEVROLET CRUZE, BENZ, SCANIA etc.Ordering Instruction:1. Payment term: TT, 30% deposit, balance before shipment2. Minimum order quantity: 3,000 meter/size3. Monthly production capacity: 1200,000 meters4. Lead time: 25~30 days5. Package: in roll or wooden spool, then on wooden pallet.6. Sample making: yes, available7. OEM: welcomeWho We Are?We are a professional push pull control cable conduit and inner member manufacturer with years of industry experience, main products are push pull cable outer casing, galvanized or stainless steel wire rope used as control cable inner member, helix wound cable etc mechanical control cable parts.Our factory is ISO/TS 16949:2009 certified, with strict quality management and full set of testing means, we’ve been committed to creating more value for quality-oriented clients aiming at middle and high-end market with an affordable price since Day 1. Thanks to continuous pursuit of quality control, our cables have won approval and trust from many famous automobile enterprises, such as VOLKSWAGON POLO, CHEVROLET CRUZE, HYUNDAI ELANTRA & SONATA, KIA K5, REYNOLDS, BENZ, SCANIA etc. Currently we have built long term relationships with control cable assembly manufacturers in North America, South America, Europe and Asia, should you have any requirement or demand, please feel fee to contact us, all our staff at your disposal.Main ProductsRelated InformationBowden cableHousingThe original, standard Bowden cable housing consists of a close-wound helix of round or square steel wire. This makes a flexible housing but causes the length to change as the housing flexes. Because on the inside of the bend the turns of a close-wound helix can't get any closer together, the bending causes the turns to separate on the outside of the bend, and so at the centerline of the housing, there must also be an increase of length with increasing bend.In order to support indexed shifting, Shimano developed a type of housing that does not change length as it is flexed. This housing has several wire strands running in a multiple helix, with a pitch short enough such that bends in the cable are shared by all strands, but long enough so that the housing's flexibility comes by bending the individual strands rather than by twisting them.
Other supplier products
All supplier products
Same products
