.

Best Quality Tin-lead Wave Soldering Bar Sn63Pb37

Product DetailsBest quality tin-lead wave soldering bar BBIEN TL-01 Sn63Pb37Sn63Pb37 lead solder bar descriptionSn63/Pb37 Electropure™ is the best quality of tin-lead alloy wave soldering bar,its purity alloy that is composed of 63% tin and 37% lead. Electropure is alloyed in a proprietary method that results in a low drossing, high wetting solder. The Electropure process reduces suspended oxides in the solder, thus reducing drossing, improving flow, and reducing bridging during soldering. Sn63/Pb37 is a eutectic alloy with a melting point of 183°C (361°F). Typical applications are wave soldering and plating where Sn63/Pb37 is primarily used as a coating for corrosion protection, and as a base for soldering. This alloy is available in bar, solid and cored wire,powder, solder paste.Technical DatasheetSpecificationsProduct TypeSolderBrandBBIENMaterialTin-lead alloy barCompositionSn,PbMelt point183 degree CelsiusUsingMatch with solder flux for wave solderingApplicationMetal soldering,electronicsDensity (g/m^3)8.6Bar/Stick size32*2.0*45pxWeightAppox 0.96kg/pcTypeLowtemperature solder barPlace of originMade in ChinaCertificateSGSKeywordTin lead wave oxidation resistance solder barSn63Pb37 lead solder barSolder bar 63/37Temperature Requirements: Wave soldering pot temperature of 150° -240°C. Refer to the flux data sheet for specific pre-heat instructions.Sn63Pb37 Products featureReduced oxidation rate and  lower dross formation as compared with conventional alloys.Better wetting characteristics even for solder bath temperatures which are somewhat below the usual operating temperature -> reduces the risk of damage to heat-sensitive components.Significantly lower amount of oxide during melting and in continuous operation than for solders which have not been produced according to the STRATOLOY manufacturing process.Excellent Fatigue Resistance –Compatible with all Flux Types Excellent Solder Joint ReliabilityApplicationUsual electronic component, PCB soldering; copper plate boards.The use of BBIEN TL-01 Sn63Pb37 wave soldering bar as wave solder requires a solder bath temperature of approx. 190~210 °C; this alloy can also be processed at higher temperatures for selective soldering. The use of inert gas means a significant extension of the process window. The wetting of the solder is made easier and on exit from the wave, no excess solder remains attached to the components.Using notes:Before using tin-lead solder bar 63/37,pls clean the tin residul which have not removed from wave stove.You can control the time sheet according to the stove type and specific data.During wave soldering technique,need to use the good quality of soldering flux together with 63/37 soldering bar,then there will be better soldering result.At last,in order to avoid influence to the soldering effect,need to clean the tin dross which stay into the stove.Packing informationBBIEN TL-01 Sn63Pb37 Sn-Pb solder bar is available in 0.82~0.93 trapezoidal bars to easily distinguish it from traditional rectangular tin-lead bars,20kg per box.Storage and Shelf LifeThe shelf life of solder bar is based on the chemistry of the flux core and the protective alloy covering of the wire.When stored in a dry, non-corrosive environment between 10°C-40°C (50-104°F), the shelf life of wire may be nearly indefinite. The expiration date determined by the date of manufacture printed on the product and Certificate of Analysis will represent the manufacturer’s warranty period which is the time frame where in BBIEN will replace defective product.Solder bar have a 2 year warranty from the date of manufacture.Checkout and payment:After Auction Close, you can go ahead and checkout with bank system.We do not offer combine payment and discount, since items might dispatch from our different warehouse. Make sure you file correct shipping address during checkout, and you will be guid to Payment link. You will be able to pay through our bank account by 100%T/T advanced L/C at sight is acceptableShipping way:We have a cooperation with big express company,such as CHINA POST(EMS),TNT,DHL,FEDEX,UPS;We also connect with SF express inland market,while the delivery time is short.During shipping,we will follow up within 24 hours,and report the relevant process scheduling for you.Exported SituationBBIEN TL-01 Sn63Pb37 solder bar have been exported to Bangladesh, Saudi-Ara,UAE,Egypt.We are highly appreciated your kindly inquiry and feedback to BBIEN,and cooperate in the future.Products PhotosTechnical DatasheetBest quality tin-lead wave soldering bar BBIEN TL-01 Sn63Pb37Specification DataTemperature Requirements: Wave soldering pot temperature of 150° -240°C. Refer to the flux data sheet for specific pre-heat instructions.Physical Properties:BBIEN TL-01 Sn63Pb37 solder bar for soldering applications which require maximum reliability of solder joints, especially for surface mounted components, only solder of the highest purity is acceptable.Metal PropertyUnitsVaculoy Sn63Pb37SolidusCelsius183LiquidusCelsius190HardnessHV15Densityg/cc8.45Elongation at failure (%)Mean21.8Std Dev8.8Thermal Expansion Coefficient-5(30 - 100C)/C x 101.79-5(100 - 150C)/C x 102.30Tin Sn%63+/-2Lead Pb%37 +/-2Recommended Process SettingsWave ConfigurationProcess ParameterSuggested Process SettingsSingle WavePot temperature180 - 190°CConveyor speed0.8 – 1.0 m/min (one minus)Contact time2.3 - 2.8 secondsWave Height1/2 to 2/3 of board thicknessDross removalOnce per 8 hour run timeCopper CheckEvery 8,000 boards until 40,000Dual WavePot temperature180 - 200°CConveyor speed0.8-1.0 m/min (3.3 - 5 ft/min)Contact time3.0 - 3.5 secondsWave Height1/2 to 2/3 of board thicknessDross removalOnce per 8 hour run timeCopper CheckEvery 8,000 boards until 40,000These are general guidelines which have proven to yield excellent results; however, depending upon yourequipment, components, and circuit boards, your optimal settings may be different. In order to optimize yourprocess, it is recommended to perform a design experiment, optimizing the most important variables (i.e.amount of flux applied, conveyor speed, topside preheat temperature, solder pot temperature and boardorientation, etc…).Maximum Allowed ImpuritiesUltrapure meets the requirements of current industry standards for allowable impurity requirements.ElementJ-STD-006CBBIEN UltrapureUltra Low DrossTin(Sn)BalanceBalance63.5Lead(Pb)0.0700.070BalanceAntimony(Sb)0.2000.2000.050Copper(Cu)0.0800.0800.015Gold(Au)0.0500.0500.002Aluminum0.0050.0050.002Cadmium0.0020.0020.001Zinc0.0030.0030.001Silver0.1000.1000.050Bismuth0.1000.1000.020Arsenic0.0300.0300.020Iron0.0200.0200.010Indium0.1000.1000.007Nickel0.0100.0100.002Ultrapure will conform to these requirements when purchased directly or through stocking distributors. BBIEN is the manufacturer of high purity quality solder bar (Soldering Technology, High Quality/High Reliability) states that it is the responsibility of the manufacturer to select those materials and processes that will produce acceptable high quality/high reliability products. Except where otherwise indicated, the component elements in each alloy shall deviate from their nominal mass percent-age by not > 0.10% of the alloy mass when their nominal percentage is ≤ 1.0%; by not > 0.20% of the alloy mass when their nominal percentage is > 1.0% to ≤ 5.0% or by not > 0.50% when their nominal percentage is > 5.0%Advantage And ServiceBest quality tin-lead wave soldering bar Best quality tin-lead wave soldering bar BBIEN TL-01Sn63Pb37Products AdvantageLow temperature no clean wave solder bar BBIEN TL-01Sn63Pb37 lead bar solder offers excellent solderbility,wettibility and reliability among Pb free solder wire,it is available in a wide product lineup according to the required soldering temperature.BBIEN BBIEN BBIEN TL-01Sn63Pb37 lead bar solder lead low temperature solder bar can be not only applied to tradional electronics pcb,electronics soldering,but also its application for some new hi-tech industry, semiconductor. LED,aerospace,automotive.BBIEN TL-01Sn63Pb37 lead bar solder its 183 degree Celsius melting point tin based soldering bar can be packaged 20kg per carton which is used for both hands soldering and wave soldering technique.Very good constant flow and wetting,clear and transparent residues•Lowers Total Cost of Ownership due to the lower material cost,high yields and low dross generation.•Excellent mechanical reliability.•Provides very good solderability due to the fast wetting speed.•Reduces erosion of copper plating during rework which improving assembly reliability.•Friendlier and less aggressive to solder pot material as compared to silver-bearing alloys.•Delivers good performance across different soldering processes.Packing information:10-20kg per carton Size of Carton:36*26*450pxMOQ:100kgOEM can be discussed,we will use our own label if customers have no other requirement.Thanks to BBIEN long-term unremitting R&D for solder technique,until now,BBIEN have the following high-tech solder product for different tin-lead alloy.Production Ability:60ton per weeksMOQ:100kgAlloy compositionSn/PbSpecific gravityLiquid temperatureTemperatureApplication63/378.39183220~240Computers,precision instruments,meters,TV,micro technology,coating metals60/408.65190230~25055/458.75200240~260Calculators,tape recorders,teles,quartz and other common electronic and electrical products50/508.85216255~27545/558.97227270~29040/609.30238295~310General circuit boards,toys,lamps,crafts,water tanks,plumbing solder30/709.70260310~325Certificates availableBBIEN can share the datasheet for our product to our clients.Certificates of compliance,SGS,ISO and COA,MSDS,are available.We are tyring to make our product quality system more and more complete,BBIEN also appreciate your precious suggestion.Both pre-sale and after-sale,BBIEN have skilled person to follow-up our client,reply answer for reasonable price,relevant quality standard,products data informations,shipping for your questions skillfully,quickly, technical support is available.Shipping AdvantageMutiple-transportation oversea shipping ways by ari,by sea,by train and truck road way ensuring the shipment can arrive at destination all around the world safety,quickly and efficiently.Shipment can be deliveried once placing order 2 to 10 working days.Shipment will be regular go through local custom and its warehouse,BBIEN has own specialized shipping team and operators agent all over the world.ServiceWhen you send us message,BBIEN will feedback you general within 2 working hours.Our customer service or sales person will be match with you above 10-24hours.And solve your problem on solder products.OEM is available according to your own logo.Normal RAQ1.Do I need to pay the charge for sample?We offer the small free sample for testing,but the courier charge should be paid by your side.2.How about your product quality,guaranteed?Our products through strict quality control and inspection before leave factory,and haspassed the SGS.3.What is your delivery time?2-3days for delivery sample2-3days for standard goods in stock5-7days for normal order7-12days for customize order4.Any other special metal items that you make too?We produce Zn wire,Sn wire,Mo wire,Indium wire;We still make special metal alloy:e.g.,Sn-Bi,Ag-Al,Sn-Sb,Sn-Ag,Ge metal;In metal etcPayment way:A variety and flexible of payment terms,T/T,western union,paypal,L/C can be acceptable.Others:Prodution ability:6tons each day for normally solder wire diameter above 1.0mm,packing 1kg/spoolDelivery time:within 7working days after confirming payment infos.Why choose us?*We are the manufacturer of solder items,special metalalloy,you can buy the suitable products you need at reasonable prices.*Our customer service personnel will provide you with our competitive quotation as wellas expedite your orders&provide you with any assistance you may require.*Sales engineers are available to offer help recommending the most suitable products for your application and solve problems once you find problem to use our products.*We can accept OEM or ODM,use your brand name and logo on the solder reel!*Promptly delivery and small sample order is available.Return back to societyBBIEN also participates public benefit activities,return back to society.We support and want to create a environmental friendly society together with people.We also try our best to help someone who need us. 


Send product request

To: SHENZHEN BBIEN TECHNOLOGY CO.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Liquid Solder Flux
Liquid Solder Flux Product DetailsBBIEN LF-01 Liquid solder fluxIntroduction for BBIEN liquid LF fluxBBIEN LF-01 flux is a weak-halide activated foam flux conforming ...
Type5 Sn42Bi57.7Ag0.3 Low Temperature Solder Powder
Type5 Sn42Bi57.7Ag0.3 Low Temperature Solder Powder Product DetailsBBIEN LF-03 type5 Sn42Bi57.7Ag0.3 low temperature solder powderBBIEN Solder PowderSolder powders are the key component of all solder...
Solid Tin-bismuth 138 Degree Melting Point Solder Wire Sn42Bi58
Solid Tin-bismuth 138 Degree Melting Point Solder Wire Sn42Bi58 Product DetailsSolid tin-bismuth 138 degree melting point solder wire BBIEN LF-04Sn42Bi58Sn42-Bi58 solder wire descriptionBBIEN LF-04 Sn42/Bi58 low...
Rosin Core Tin-lead Solder Wire Sn63Pb37
Rosin Core Tin-lead Solder Wire Sn63Pb37 Product DetailsRosin core tin-lead solder wire BBIEN TL-01 Sn63Pb37Brief Description for TL-01 Sn63Pb37 solder wireBBIEN TL-01 Sn63/Pb37 leaded no ...
Low Oxygen Content Sn63Pb37 Solder Powder (type3~type7)
Low Oxygen Content Sn63Pb37 Solder Powder (type3~type7) Product DetailsLow oxygen content Sn63Pb37 solder powder (type3~type7) Sn63Pb37 powder instructionBBIEN Technology supplies tin lead series powder ...
All supplier products

Same products

Adjustable Modular LED Flood Light (TGD03)
Adjustable Modular LED Flood Light (TGD03) Seller: Guangzhou Anern Energy Technology Co., Ltd AN-TGD03 series led modular flood lighting is an engineering lighting fixture with adjustable LED...
Adjustable bracket LED street light(SLH6)
Adjustable bracket LED street light(SLH6) Seller: Guangzhou Anern Energy Technology Co., Ltd The AN-SLH6 series adopts the LED modular design, which can adjust the power flexibly by adding o...
Adjustable LED Module All In One Solar Street Light (SLA)
Adjustable LED Module All In One Solar Street Light (SLA) Seller: Guangzhou Anern Energy Technology Co., Ltd AN-SLA series is the latest solar street light model independently developed by Anern. This serie...
600*600 LED Panel Light(IPM03C/FPL)
600*600 LED Panel Light(IPM03C/FPL) Seller: Guangzhou Anern Energy Technology Co., Ltd AN-FPL series led 600x600 36w panel light are new straight-emitting panel lights developed by Ane...
4.2KW-10.2KW Home Hybrid Solar Storage System
4.2KW-10.2KW Home Hybrid Solar Storage System Seller: Guangzhou Anern Energy Technology Co., Ltd The household solar power supply systems are mainly aimed at home users. With the maturity of sol...