ENIG Pcb
2Layer Rogers RT 5880 High Frequency PCB Circuit Boards With ENIG SurfaceQuick detail: Material:Rogers 5880Layer:2 layerBoard tk:0.8mmSize:6*8CMName:Rogers 5880 PCB BoardsLine Width:8milLine Space:8milApplication:High Frequency Pcb FieldRogers 5880 pcb application:
Rogers RT5880 laminatehave the lowest Dk for a copper clad laminate available in the market today. Because of its low dielectric constant of 1.96 at 10 GHz, RT/duroid 5880LZ supports broadband applications at the microwave through millimeter-wave frequencies where dispersion and circuit losses must be minimized. It is a lightweight, PTFE-based composite optimized with a unique filler that provides very low density (1.37 gm/cm3) and a low coefficient of thermal expansion (CTE) in the Z-axis. This makes 5880LZ well suited for fabricating high-frequency circuits with plated-through holes (PTH) and allows higher vehicle payloads. In addition, the dielectric constant is uniform from panel-topanel and constant over a wide frequency range. Its low dissipation factor extends the usefulness of RT 5880 to K-band and above.Specification:
Material: Rogers 5880 Laminate
Layer:2
Surface finish: Immersion gold
Copper Weight: 1OZ
Solder mask: Black
Silk Screen: White
Delivery time: Sample for 3 days, Mass production：5-8 days,24 hours availableFabrication
SMOBC, LPI
Up to 30 layers 4mil Line/Spacing
Controlled Impedance
Immersion Gold, Soft Bondable Gold
Gold tabs, Selective gold, White Tin
Blind and Buried Vias
Scored and Tab Route Panels
Electrical Testing
UL ApprovedPCB Capabilities
Surface Finish:
HASL Minimum Thickness .0015"
HASL Maximum Thickness .030"
Electrolytic Hard Gold Max. Thickness 50 u. in.
Gold Maximum Thickness 30 u. in.
Immersion Gold Thickness 2-5 u. in.
Silver Thickness 3-4 u. in.
Entek (OSP) Co-Planarity = Copper PlatePlace of Origin:ChinaBrand Name:XCEModel Number:XCEBR-1PortShenzhen,HongKongMinimum Order Quantity:1pcsPrice:Please send gerber file for accurate pricePackaging Details:Inner:vacuum packed bubble bag Outer:carton boxDelivery Time:3-8daysPayment Terms:T/T,western union,paypal,L/CSupply Ability:1, 000, 000PCS/weekRogers High Frequency 5880 Material Laminate in stock
Rogers pcb material in stock:
Rogers4003C: thickness(0.254 0.508、0.813、1.524) DK 3.38
Rogers4350B: thickness(0.254 0.508、0.762、1.524) DK 3.5
Rogers5880: thickness(0.254 0.508、0.762) DK 2.2
Rogers3003: thickness(0.127,0.508、0.762、1.524) DK 3
Rogers3010: thickness(0.635) DK 10.2
Rogers3206: thickness(0.635) DK 10.2
Rogers3035: thickness(0.508) DK 3.5
Rogers6010: thickness(0.635,1.27) DK 10.2
Other supplier products
|
|
4 Layer Pcb Board With Blind Hole Impedance Control Pcb Board |
4 layer pcb board with blind hole impedance control pcb board In the circuit having resistance, inductance and capacitance, the AC played impedim... |
|
|
Vias Filled 4003 PCB |
Vias filled Rogers 4003 PCB Boards FabricationQuick detail:
Layer: 8
Special: vias filled with resin
Half hole
Material: Rogers 4003C 0.762... |
|
|
Halogen Free Pcb |
Halogen FreeConcerns regarding the health and safety of halogenated flame retardants in PWB applications dates to the early 1990s when it was disco... |
|
|
Blind Vias Pcb |
High Frequency Rogers RT 5880 PCB Boards For Satellite Antenna SystemsDescription: Model: XCECR-5Layer: 6Surface finish: immersion goldBoard size:1... |
|
|
RF Pcb |
RF printed circuit boards Radio Frequency PCB Quick detail:
Base material: Rogers/Teflonlaminate
Copper weight: 0.5OZ-3OZ
Board thickness:0.1... |
All supplier products
Same products
