6pins Digital Passive Infrared Sensor BS612
Overview
Senba is one of the most professionalPIR sensor manufacturersfor more than 15 years. We are the most advanced factory with complete categories. With strong R&D center, there are digital type and analog type, dual elements and four elements for you choose. The market cover domestic market, Korean, Amertica, Turkey and Europe.
Senba Pyroelectric Infrared Sensors with high sensitivity, low noise and reliable performance. We have our own research and development department, with international technology and Hybrid IC technique expertise developed more than 15 years. The goods come standard with enhanced immunity to RFI (Radio Frequency Interference) and 2.4G high frequency interference. Senba PIR sensor suppport delay time, sensitivity adjustable, lighting adjustable.
Featuresof pir movement sensor
Schmidt REL output
Low voltage, low power consumption, instantaneous settling after power up
Technical Data
Characteristics |
Symbol |
Unit |
Remarks |
||
Supply Voltage |
VDD |
-0.3 |
V |
||
Working Temperature |
TST |
-20 |
85 |
°C |
|
Into |
-100 |
100 |
mA |
||
Storage Temperature |
TST |
-40 |
125 |
°C |
- 25°C, Vdd=3V,Except other requirements)
Characteristics |
Symbol |
Type |
Unit |
Remarks |
||
Supply Voltage |
VDD |
3 |
V |
IR = 0.5mA |
||
Working Current |
IDD |
9 |
11 |
μA |
||
Sensitivity |
VSENS |
90 |
2000 |
μV |
||
Output REL |
||||||
Output Low Current |
InOL |
10 |
mA |
VOL<1V |
||
Output High Current |
1NC |
-10 |
mA |
VOL>(VDD-1V) |
||
Lock time |
TOL |
2 |
s |
|||
On-time |
TOH |
2 |
4793 |
s |
||
SENS / ONTIME |
||||||
Input voltage |
0 |
VDD |
V |
0VtoVDD/2 |
||
Input Bias Current |
-1 |
1 |
μA |
|||
OEN |
||||||
Input Low Voltage |
VIL |
Vdd |
||||
Input High Voltage |
InIH |
Vdd |
||||
Input Current |
II |
-1 |
1 |
μA |
VSS<VIN<VDD |
|
Oscillator & Filter |
||||||
Low pass filter cut-off frequency |
7 |
Hz |
||||
High pass filter cut-off frequency |
Hz |
|||||
Oscillator frequency on Chip |
FCLK |
64 |
kHz |
|||
Interior Block Diagram |
Applications
start air conditioning or turn on the lights.
Toys
Digital photo frame
TV, Refrigerator, Air-conditioner
FAQ
- passive infrared motion detector?
Five Causes of PIR False Alarms. The first cause of PIR false alarms is low or unstable voltage at the detector. Test to make sure the voltage at each PIR is above 13VDC and stable. The second cause of false alarms is sudden infrared movement / heat changes in view of the detector.
When the sensor is idle, both slots detect the same amount of IR, the ambient amount radiated from the room or walls or outdoors. When a warm body like a human or animal passes by, it first intercepts one half of the PIR sensor, which causes a positive differential change between the two halves.
Send product request
Other supplier products
Low Power Consumption Infrared Motion Sensor for Lighting G2X2 | An Overview of Low pir sensor power consumptionInfrared Motion Sensor for Lighting G2X2 G2X2, with the low power pir motion sensor module, is quad ... | |
Linear Light Sensor | Linear Light Sensor, we also call it photoresistor light sensoror phototransistor. The chip integrated inside the ldr light sensoris very sensitive... | |
3Pins Electronic Components PIR BL312 From Senba Factory | Senba Sensing Technology Co.,Ltd. is a professional china sensor manufacturer. We provide Infrared Thermopile Sensor, Digital PIR Sensor, passive i... | |
Fast Response Light Dependent Resistor φ10 Series for Light Switch | Featureof light sensitive resistor Coated with epoxy Good reliability Small volume Good spectrum characteristic Standard Type and Specifications ... | |
PIR Sensors Used in Security Alarms and Automatic Lighting Applications D205B | Owning very strong R&D Center, Senba can research and develop the pyroelectric infrared sensor independently. Among those china pirsensor manuf... |
Same products
China manufacturer Pressure Gauge HS75668 for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer Pressure Gauge HS75668 for power generation It is YOYIK special sale. Deyang ... | |
"China factory Vacuum Switch HS70595 for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory Vacuum Switch HS70595 for power station Our company mainly serves thermal power pl... | |
China made TSI Preamplifier CON021/916-240 for power plant | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | China made TSI Preamplifier CON021/916-240 for power plant Dongfang Yoyik has advanced technology... | |
China manufacturer Preamplifier for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer Preamplifier for power generationIs to use the generator sets of professiona... | |
China Yoyik Upper bearing positioning sleeve DLD320-20X2 for turbine generator | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China Yoyik Upper bearing positioning sleeve DLD320-20X2 for turbine generatorSold by YOYIK. Dey... |