High Frequency PCB
High frequency pcb, High frequency pcb low dielectric constant, high transmission rate, high frequency pcb low dissipation factor, less dielectric loss,high frequency pcb manufacturingapply to 5G, rail transport and internet of things industry. HUIHE CIRCUITS high frequency PCB has passed ISO9001/ ISO13485 /IATF16949 /UL /RoHS/REACH certification.
High Frequency PCB List
2 layer F4B ENIG PCB
2 layer F4B OSP PCB
2 Layer Rogers ENIG PCB
2 Layer Rogers ENIG rf PCB
2 Layer Rogers LF-HASL PCB
2 layer Taconic ENIG PCB
4 Layer FR4+Rogers ENIG PCB
6 Layer FR4 High TG F4B impedance control PCB
FR4 Circuit Board, How To Distinguish Between Ordinary Board And High Frequency PCB?
The high-frequency board is pressed with a whole piece of epoxy glass cloth, and the color of the whole board is relatively uniform and bright; at the fracture, you can easily see the white powder with the color of rice by scraping it with your hand or other tools. White. The density is higher than that of ordinary FR4 board, and the weight is heavier.
Ordinary FR4 PCB Board is made of glass fiber board (composite board). The color of the back substrate is different. Large stripes can be seen on the back of the entire board. Check for different types of PCBboard.
What Failure Phenomenon Will Occur When The Performance Of The High-Frequency Board Is Poor
The poor performance of the high-frequency board is mainly due to the low dielectric constant value which affects the working stability of the high-frequency circuit. It may cause signal attenuation, frequency offset drift, and severely stop vibration. The overall electrical performance index is reduced.
What Are The Common Types Of High-Frequency Boards?
Shengyi [ S7136 ]
Rogers [ RO3003, RO3010, RO4003C, RO4350B, RO5880 ]
Taconic [ TLY-5, TLX-6, TLX-8, RF-35 ]
Wang Ling [F4BM220, F4BM255, F4BM265, F4BM300, F4BM350]
Mixed laminated multi-layer board [RO4350B+FR4, RO4003C+FR4, RF-35+FR4, TLX-8+FR4, F4BME+FR4]
Pure laminated multilayer board [RO4350B+RO4450F+RO4350B, RO4003C+RO4450F+RO4003C, F4BME+RO4450F+F4BME]
As a high frequency pcb company, we have types of high frequency pcb materialfor sale, if you have needs, please contact us.
Send product request
Other supplier products
 |
2 Layer OSP Impedance Control Half Hole PCB | Number of layers: 2 Surface finish: OSP Base material: FR4 Outer Layer W/S: 6/4mil Thickness: 1.0mm Special process: impedance control+half ho... |
 |
4 Layer High TG Impedance Control Fine Pitch PCB | Number of layers: 4 Surface finish: ENIG Base material: High TG FR4 Outer Layer W/S: 4/3.5mil Inner layer W/S: 4/3.5mil Thickness: 1.0mm Spec... |
 |
Via In Pad Fr4 PCB | Via In pcb board material fr4, using copper plating or epoxy to fill holesfor circuit board factor, prevent solder paste or flux from flowing into ... |
 |
6 Layer LF-HASL PCB | Number of layers: 6 Surface finish: LF-HASL Base material: FR4 Outer Layer W/S: 11/6mil Inner layer W/S: 16/5mil Thickness: 1.6mm Advantages ... |
 |
Rigid Flex PCB | Rigid flex printed circuit boards, flex board and rigid board connect after lamination and other processes, according to relevant technology requi... |
