Spray Cooler
PrincipleMelted solid is fed into spray tower by high pressure pump, the mist form melted solid will contact with fresh air (or cooling air) to become ball shape solid. Product from spray cooler has very good uniformity, fluidity and purity.All of the feeding system should keep good insulated in case solidification during feeding. Air chiller as an optional choice depends on specific raw material and operation environment.Technical ParametersDiameter of towerØ3000mmArea of chiller20m2Discharging power 1.5kwAgitating power1.1kw(Auxiliary discharge device)Feeding pump1.5kwSpray nozzleNozzle for melted solidCyclone separatorB-1100Exhausting fan30kw
Other supplier products
|
|
Multilayer Mesh Belt Dryer |
DescriptionDW Multi-layer belt dryer usually adopt two to five belt layers,Website:, raw material being fed from the top belt, and re-circulating l... |
|
|
Nozzle Tower Spray Dryer |
PrincipleThe liquid or paste form raw material is sprayed into fine mist under the function of high pressure pump. Mist form material then contact ... |
|
|
Vertical Vibrating Dryer |
PrincipleWet raw material enters into helix vibration plate from top and moves along with the helix plate under the function of vibration force and... |
|
|
Sludge Double Shaft Paddle Dryer |
DescriptionSludge double shaft paddle dryer is a kind of indirect heated dryer. There is jacket on the body, hollow paddle strongly welded on two o... |
|
|
Rotary Drum Dryer |
PrincipleGT model rotary drum dryer is a kind of indirect heating dryer in continuous production. Raw material fed from top or bottom of drum and s... |
All supplier products
Same products
