control electric joystick
Model: SQ1 master controller
Product style 1: single axis "one" word limit.
Mode of operation Y: there is a gear type.
Output type V1:-10V ~ 0V ~ +10V
Potentiometer resistance 2k:2k
Handle type: reference handle type selection
Line character code: refer to commonly used closed list to select code.
Main technical parameters
Temperature requirements: working temperature: -20 C ~ +60 C
Above panel protection level: IP54
Vibration frequency: 10Hz-200Hz
EMC anti interference level: 100V/m 30MHz-1GHz 80% sine wave modulation meets EN50082-2 standard.
EMC launch level: 150kHz-30MHz B level to meet EN50081-2 standard
Mechanical turn: + 32 degree (potentiometer)
Operating torque: 15N (50Nmax)
Mechanical life: 5 million
Mechanical error: + 0.5 degrees.
Other supplier products
|
crane operator cabin |
crane operator cabin which is produced by us according to the human engineering principle. |
|
grid coil resistor |
grid coil resistor is stable and the errors of the total values of the whole resistance and every segment are less than ±7.5%. |
|
hoist electric cam controller |
hoist electric cam controller AC 50Hz,380V(440V) and below secondary circuit, |
|
red crane drive cabin |
red crane drive cabin SQJ7 is more suitable for 5-50t middle and large-scaled overhead and gantry |
|
4mA~20mA electric joystick |
Main technical parameters
Temperature requirements: working temperature: -20 C ~ +60 C
Above panel protection level: IP54
Vibration frequency: 1... |
All supplier products
Same products