DC48V1.25A Power Adaptor 4 Channel 10M100M PoE Switch (POE1105)
DC48V/1.25A power adaptor 4 channel 10M/100M PoE switchDC48V/1.25A 4 channel 10M/100M PoE switch (POE1105)Specifications1. Up to 15.4W/channel 2. High quality DC48V/1.25A power adaptor 3. 10M/100M bandwidth5 Port 10/100Mbps Network POE power switch4 PoE port and 1 auto-adaptable UpLinkSpecification:Model No.POE1105POE1109StandardIEEE802.3afPoE Ports4 PoE portst8 PoE portsUp Link Ports1 Up Link Port1 Up Link PortLEDPower(red); PoE In-Use(orange); 10/100 LINK/ACT(green)Power Requirement100-240V AC, 50/60HzAdapter Power Requirement Input: 100-240V AC, 50/60Hz, 2.0A; Output: 48V, 1.25AInput: 100-240V AC, 50/60Hz, 2.5A; Output: 48V, 2.5APower Consumption /Dissipation60 Watts Max.120 Watts Max.PoE Power OutputPer Port 48V DC, 320ma. Max. 15.4 WattsPoE Power Supply Type1/2(+), 3/6(-), Mode-A, End-SpanPoE Power BudgetPoE Max. 50WPoE Max. 110WMax. number of Class 3 PD3-Ports7-PortsRegulation ComplianceFCC Part 15 Class A, CEStandards ComplianceIEEE 802.3: 10Base-TIEEE 802.3u: 100Base-TXIEEE 802.3x: Flow ControlIEEE 802.3ad: Port trunk with LACPIEEE 802.1D: Spanning tree protocolIEEE 802.1W: Rapid spanning tree protocolIEEE 802.1P: Class of serviceIEEE 802.1Q: VLAN TaggingIEEE 802.1x: Port Authentication Network ControlIEEE 802.3af: Power over EthernetOperating Temperature : 0~50 Degree C Relative Humidity: 20~95%StorageTemperature : -10~70 Degree C Relative Humidity: 20~95% (non-condensing)Dimension(WxDxH)116.6x83.6x27.8mm185x103x28mmProducts Description:POE1105 is a new generation of PoE switch which supplying power for the wireless access point of AP and network camera by using UTP CAT5e, have 4 ports of 10/100Mbps standard PoE power supply and an auto-adaptable 10/10Mbps UpLink. By using new generation of PoE management Chipsets it could be 802.3af/at compatiable by use different power adaptor.Typical Application:1. IP terminal supports PoE power supply, connecting the terminal to the PoE for electrical appliances, and canble provide DC power through transmitting data, IP terminal without laying power supply.2. IP terminal does not support PoE power supply, the IP terminal equipment need to add a PoE splitter, the PoE splitter connected to the PoE power supply, separating the data and electricity. Through the internet to transmit data, DC power line transmits power. Seperate supply IP terminals, IP terminal without laying power supply. As shown belowDiagram
Other supplier products
All supplier products
Same products
