API 5CT K55 Oil Casing Pipe
API-5CT K55 oilfield casing pipe is very similar to J55, there is no significant difference in the chemical composition and yield strength, however the ultimate tensile strength of K55 is higher than J55 steel, K55/J55 are 655MPa and 517MPa respectively.K55 has better mechanical and thermal fatigue resistance and crack resistance than K55. For a thermal production well, the heavy
wall K55 casing is appropriate instead of J55 casing. The former has a better thermal fatigue resistance property than the latter.In present sales, the selling price of theses two types is generally kept the same, their application is very similar. In the
oil drilling, K55 API 5CT casing or tubing is a relatively common type. SpecificationsInspectionPhysical properties are checked and each length hydrostatically tested, normally to only 3,000 psi in the plain end (unthreaded)
condition. The following are also checked:●Dimensions●Weights●Straightness●LengthsPart of this inspection is to drift all lengths.Despite all the American Petroleum Institute (API) specifications and testing,
some tubing defects are still found after delivery; thus, some operators do further inspection.Inspection Method●Size and surface inspection●NDT and pressure test and third party certication●Hydrostatic●Drifting test●Physical and chemicail analysis●Hardness and pressure test.●Electromagnetic●Magnetic particle●Ultrasonic
Other supplier products
|
API 5CT N80 P110 Oil Tubing |
API 5CT N80 type tubing is used in the medium pressure drilling environment. It is installed inside of the casing pipe, oil will be drilled from we... |
|
API 5CT OCTG seamless tubing and casing pipe |
Size: 4 1/2"- 20" Casing
2 3/8"- 4 1/2" Tubing
Out diameter: 73.02mm- 508mm
Wall thickness: 4.24mm- 22.22mm
Material: Carbon steel, Allo... |
|
API 5CT J55 Oil Tubing |
Our API 5CT J55 oil transfer steel tubing is mainly used for oil and gas recovery, water injection, as well as acidifying and fracturing in the oil... |
|
API 5CT L80 Oil Casing Pipe |
L80 belongs to steel grades group of corrosion-resistant casing. L80 API oilfield casing pipe includes L80-1, L80-9Cr, and
L80-13Cr. L80-1 is used... |
|
API 2 7/8 inch pup joints |
Standards - API or customer specification
Sizes - 1" to 4-1/2" EUE & NUE, 1" to 2-1/16" IJ
Lengths (+/- 3") - 2’, 3’, 4’, 6’, 8’, 10’, 12’ & ... |
All supplier products
Same products