Aniline point of petroleum products tester FDH-2111
Application range
Aniline point of the petroleum products oximeter applicable standards: ISO2977 GB/T262 This instrument applies to the determination of the aniline point of the petroleum products, the test method is the predetermined volumes of aniline and the sample placed in a test tube, and mechanically stirred and mixed.The mixture was heated at a controlled rate until the two-phase mixed thoroughly.Then the temperature of the mixture under cooling at a controlled rate, when the two phases were separated, the recording of the aniline point. Features
1, accurate photoelectric detector separation of state;
2, the high-power solid-state regulator to control the heating rate;
3, the voltage shows a heating state;
4, integrated structure, easy to operate;
5, standard glass test tube, in line with the requirements of the standard;Specifications
1, Heating: Electric tube heating
2, the mixing method: flexible shaft agitation
3,Detection: photoelectric detection
4 Measuring range: room temperature ~ 150°C
5 Working Power: AC220V 50HZ
6, the temperature adjustment: a solid-state regulator
Other supplier products
|
|
Closed cup flash point tester of petroleum products FDT-0201 |
Electric mixer, solid state regulator to control the heating rate,
High thermal efficiency, reliable and durable economic security
|
|
|
FDR-1101 copper corrosion tester for petroleum products |
Application range
Comfirm to GB/T5096, ISO2160, ASTM D130, IP154 related standards "petroleum products copper corrosion test method suitable fo... |
|
|
The lubricant liquid rust analyzer FDT-0701 |
lubricant liquid rust meter FDT-0701
Comfirm to SH/T0193, ASTMD2272
Also applied to assess the other oils, such as hydraulic oil, cycle oil, an... |
|
|
Lubricant foam performance analyzer FDT-1102 |
24 ± 0.5 ℃ ~ 93.5 ± 0.5 ℃, penetration :3000 ~ 6000ml/min, with the refrigeration system, the implementation of standards: GB/T12579.
|
|
|
FDT-0315 Solidifying Point/CFPP/Solidfying Point/Pour Point Tester |
FDT-0315 Solidifying Point/CFPP/Solidfying Point/Pour Point Tester
Specifications
It is suitable to determine solidifying point, pour point, cloud ... |
All supplier products
Same products
