Cement Head
Cement HeadUsage: Cement Head is a special tool for cement slurry injection and release plug, and it is a device for cementing at the top of casing. One or two cementing rubber plugs can be installed at the same time. The double plug cement head can be used for conventional double plug well cementation, and can be used for continuous double stage cementing operation.Features:1.With quick connection, which could be easily connected on site, and can be connected with the API threads for a wide range of application.2.Double balance tube structure, in the use of the lower interface for cementing operations, so that the rubber plug up and down at both ends of the same pressure, eliminating the negative pressure shaft suction on the impact of the retaining pin, open and block off the pin easily.3.Double indicator structure, accurate display of the through of cementing of rubber plug, which is easily to judge by the operator.4.The main body is made from the thick wall seamless pipes, which is the high pressure and long service period5.Upper cover cap and union nut is used large pitch trapezoidal thread, which is easily to dis-assembly.Type:SSC double plug cement headDSC single plug cement headZSC drill pipe cement head Single Plug Cement HeadSpecification (in)13-3/810-3/49-5/87-5/875-1/2Overall Length (mm)1.9591.9731.8951.6051.6051.523Rated Pressure (MPa)3550Manifold Connection2″UnionI.D.of Plug Container (mmLength of PlugContainer (mmDouble Plug Cement HeadSpecification (in)13-3/810-3/49-5/87-5/875-1/2Overall Length (mm)2.770(2.209)2.723(2.283)2.606(2.165)(2.257)(2.177)(2.045)Rated Pressure (MPa)3550Manifold Connection2″UnionI.D.of Plug Container (mmNote:The overall lengths shown in brackets are for drill pipe cementing heads without lift joints.Drill Pipe Cement HeadSpecification (in)5-1/253-1/22-7/8Overall Length (mm)1.9371.890(1.344)1.654(1.090)910Rated Pressure (MPa)2″UnionManifold Connection450340294I.D.of Plug Container (mmNote:The overall lengths shown in brackets are for drill pipe cementing heads without lift joints.If you have any further requirements, please feel free to contact us
Other supplier products
|
|
Spray Pump |
Spray PumpThe spray pump adapt single-stage, single suction, horizontal cantilever centrifugal pump. It is mainly used for spraying, cooling, lubri... |
|
|
BOP Rubber Core |
Annular blowout preventer The annular blowout preventer is divided into the cone rubber core and spherical rubber core according to the structure o... |
|
|
Taper Tap |
Taper TapThe Taper Tap is especially used for tapping and fishing the fallen substances in the hole from the inner hole,like oil tubing, drill pipe... |
|
|
Rotary Kelly |
Rotary KellyKelly is the drive part of whole drill string, it transmit the torsional energy from the rotary table to the bit in the bottom of the h... |
|
|
Section Mill |
Section MillSection mills are primarily used to mill sections in the casing for: Sidetracking, gravel packing, and/or perforation zones. GAOTON sec... |
All supplier products
Same products
