Suction Press Roll
Product Description:
Material: Roll body is made by SUS304, shell thickness 50mm. Vacuum box, water pipes and connecting parts are all stainless steel.
Vacuum box: welded by stainless steel. Suction mouth angle is controlled by worm gear of bearing at operation side. The whole chambers can be taken out for maintenance.
Seal & shower: There are air bellow and sealing strip in the roll, air bellow pressure is 0.025~0.07Mpa, with shower inside. Sealing strip material is graphite rubber.
There are air bellow pressure gauge and vacuum gauge at operation side.
Lubrication: Grease.
Other supplier products
|
|
Top Former for Paper Machine |
Product Description:
Modern hybrid formers are normally adjusted with four to six loadable counter blades on the bottom side of the top former uni... |
|
|
Kraft Paper Rewinder |
Product Description:
Designed to process all grades of uncoated paper, Kraft , Packaging paper and corrugated products or board.
Product Feat... |
|
|
Film Press for Paper Machine |
Product Description:
This is a film press for simultaneous double-sided paper sheet coating, or sizing of paper and board. Different suspensions... |
|
|
Coarse Pressure Screen In Pulp |
The coarse pressure screen is suitable for screening slurries from high-density cleaners. This step is also referred to as the coarse screening of ... |
|
|
Online Thickness Gauge |
Product Description:
The frames can be O-shaped and C-shaped frames. The effective scanning width is customized as needed.PSD-500 X-Ray non-contac... |
All supplier products
Same products
