Freeze thaw cycle test chamber

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

(1)GB/T 9535 Crystalline Silicon Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

(2)GB/T 18911 Photovoltaic Modules – Environmental Test Methods

(3)GB/T 2423.1 Environmental Testing for Electric and Electronic Products – Part 2: Test Methods – Test A: Cold

(4)GB/T 2423.2 Environmental Testing for Electric and Electronic Products – Part 2: Test Methods – Test B: Dry Heat

(5)GB/T 2423.3 Environmental Testing for Electric and Electronic Products – Part 2: Test Methods – Test Ca: Damp Heat, Steady State

(6)IEC 61215 Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

(7)IEC 61730 Photovoltaic (PV) Module Safety Qualification

(8)IEC 60068-2-1 / IEC 60068-2-2 / IEC 60068-2-30 Environmental Testing – Cold, Dry Heat, Damp Heat

(9)UL 1703 Standard for Flat-Plate Photovoltaic Modules and Panels

(10)JIS C 8918 Environmental Test Methods for Photovoltaic Modules (partially applicable)

Parameters

Item	Technical Specification
Temperature range	-40 ℃ to 85 ℃
Temperature fluctuation	≤ ±1 ℃
Temperature deviation	≤ ±1 ℃
Temperature uniformity	≤ ±2 ℃
Heating and cooling rate	Compliant with IEC 61215 requirements
Humidity range	30 %RH to 98 %RH
Relative humidity deviation	±3 %FS; 85 ±2 %RH; 90 ±2 %RH
Humidity fluctuation	±2 %RH
Humidity uniformity	≤ 2 %RH
Temperature change rate	≤ 100 ℃/h
Extreme temperature dwell time	≥ 10 min
Test cycle count	200 cycles or 50 cycles
Maximum sample capacity	12 photovoltaic modules
Inner chamber dimensions	Approx. 1.5 × 2.5 × 1.5 m (L × W × H)
Outer chamber dimensions	Approx. 2.5 × 3.0 × 2.5 m (L × W × H)
Power supply	AC 380 V / 60 Hz

Features

High-precision temperature and humidity control system meeting stringent photovoltaic testing requirements

Supports both thermal cycling and damp heat freeze test modes, covering all relevant IEC 61215 clauses

Independent closed-loop control of temperature and humidity ensures fast response and stable operation

Large chamber volume enables simultaneous testing of multiple large-size photovoltaic modules

Touchscreen programmable control supports multi-step program editing and cyclic operation

Real-time display of setpoint and actual curves ensures intuitive monitoring and data traceability

Power failure memory and automatic recovery functions maintain test continuity

Environmentally friendly refrigeration system with reliable operation and low maintenance cost

Accessories

(1)Programmable control system with touchscreen interface

(2)High-precision industrial-grade temperature and humidity sensors

(3)Refrigeration compressor unit using environmentally friendly refrigerant

(4)Photovoltaic module sample racks compatible with multiple module sizes

(5)Drainage and condensation management system

(6)Optional data acquisition and management software for PC connection and data export

(7)Optional remote monitoring module for operation status viewing

(8)Consumable sealing strips for periodic replacement

(9)Humidity water filtration components to ensure humidification water quality

Test Procedures

Inspect photovoltaic modules to confirm no visible mechanical damage before testing

Install modules on the sample racks, ensuring uniform stress distribution and secure fixation

Set thermal cycling parameters according to applicable standards, including heating and cooling rates and dwell times

Initiate the test program; the system automatically performs high-temperature hold, cooling, low-temperature hold, and heating stages

For damp heat freeze testing, ensure the humidification system operates with qualified water quality

Avoid frequent door opening during high and low temperature operation to prevent thermal shock

After completion, allow the chamber temperature to return to a safe range before removing samples

Maintenance Information

Regularly inspect temperature and humidity sensors to ensure measurement accuracy

Check refrigeration and humidification systems for stable operation and proper refrigerant performance

Clean drainage and condensation systems to prevent water accumulation inside the chamber

Periodically inspect door seals and replace consumable sealing strips when necessary

Verify control system operation and backup parameters to ensure reliable long-term testing

Other supplier products

	FPC Flex Durability Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM F392 Product features 1. the stepper motor drive, high-precision positioni...
	AASHTO TP-79 retroreflectometer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Absolute Method Retro-Reflective Coefficient Tester is a precision instru...
	Dusting solar cell modules Test System	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications tests according to VDI 3956 temperature-dependent dusting and cleaning tests...
	Large diameter blasting test machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic p...
	Photovoltaic module wire tube bending testing machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard IEC 61730-2:2004: Photovoltaic (PV) Module Safety Qualification – Requireme...

All supplier products

Same products

	Two-Shot Injection Molds	Seller: WIT MOLD LIMITED	Two-Shot Injection Molds Advantages of two-shot injection molding The benefits of Double Inject...
	precision injection molding	Seller: WIT MOLD LIMITED	precision injection molding Precision injection moldingis a method demanding unparalleled accura...
	Custom Plastic Molds molding	Seller: WIT MOLD LIMITED	Custom Plastic Molds molding Plastic Molds molding servicesprovide many extremely versatile part...
	Thermoset Molding	Seller: WIT MOLD LIMITED	Thermoset Molding Key Aspects of Thermoset Molding Materials: Thermosetting Polymers:These inc...
	PE Film Scrap, Rolls, Bale, Regrinds, Lump, LLDPE, HDPE, LDPE	Seller: Plastic scrap, ferrous and non-ferrous metal scraps supplier for recycling	We have PE film scrap, including LLDPE, HDPE, and LDPE, available for ongoing shipment to buyers ...