High Flow Pleated Cartridge Water Filter HFU640UY020J
Introduction:
PALL large flow filter has a big diameter of 6 inches (152 mm), but no central supporting tube. Only one end of the filter is open and its flow manner of filtering fluid is from inside to outside. The big diameter of filter element increases effective filtering area and greatly reduces the amount of filter element and the size of its body case. Due to its large flow and long lifespan, PALL large flow filter can lower investment and human cost in many applications.
Application fields:
1) RO cartridge filtration and seawater desalination pretreatment
2) Filtration of condensed water in power plants
3) Filtration of bulk drug, solvent and water in bio-pharmacy industry
4) Filtration of bottled water, liquid glucose, edible oil, juice, soft drink and milk
5) Painting, petrochemical industry
6) Micro-electronics, film, fiber, resin
Product features:
1) The structure of gradual aperture.
2) Maximum flow of one filter can be up to 110m3/h during the water filtering.
3) Filtration system size can be reduced by 50% in maximum.
4) Filters with the length of 20’’, 40’’ and 60’’ can be offered.
5) Inside-out directions guarantee all impurities to be left inside the filters.
Technical specifications:
1) Filter size:
OD: 6 inches (152 mm)
Length: 20 inches (528 mm), 40 inches (1022 mm), 60 inches (1538 mm)
2) Parts materials:
Filter material: pleated fiberglass, pleated deep polypropylene (PP), MBPP
Supporting/diversion layer: polypropylene (PP)
End caps: reinforced polypropylene with fiberglass
Sealing material: EPR, BNR
3) Performance of filter element:
Filtering accuracy: 1micron, 4.5micron, 6micron, 10micron, 20micron, 40micron, 70micron, 100micron
Highest operating temperature: 121℃ for pleated fiberglass, 82℃ for pleated deep polypropylene (PP), 65℃ for MBPP
Maximum pressure drop: 3.4bar for pleated fiberglass, 3.4bar for pleated deep polypropylene (PP), 1.03bar for MBPP
Recommended pressure drop for filter replacement: 2.4bar, 20℃
Recommended maximum filtering water flow: 660L/min for 20inch filter, 1300L/min for 40inch filter, 1900L/min for 60inch filter
If you need, please feel free to contact Miss. Livia
E-mail:
Whatsapp( />
Other supplier products
|
|
industrial dust collector for Boiler Or Cement Plant |
Structure and working principle:
Air box pulse bag filter dust collector is composed of shell (usually 5mm carbon steel plate welded), bracket and... |
|
|
replacement EPE lube oil filter cartridge 1.060G20-000-6-P for Metallurgical Refinery |
replacement EPE lube oil filter cartridge 1.060G20-000-6-P for Metallurgical Refinery
Introduction:
EPE filter element is widely used in the hydrau... |
|
|
China No.1 Manufacturer Waste Plastic/Rubber/Tyre To Fuel Oil Pyrolysis Plant |
Working principle:First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor wil... |
|
|
Long bag pulse dust collector |
Introduction:
Long bag off-line pulse dust remover is mainly composed of upper tank, middle tank, ash hopper, air inlet flow pipe, bracket, filter... |
|
|
high quality industrial basket type strainer |
INTRODUCTION:
Basket filter is piped to remove solid impurities in the process of the equipment.
Liquid flow through the basket filter, then th... |
All supplier products
Same products
