GD-0633 Flash Point Test Set ASTM D3143
Purpose:
GD-0633 Flash Point Test Set designed and made as per T0633 “Liquid Petroleum Asphalt Flash Point Test (Tag Open Cup Methods)”in the Industry Standard JTJ052Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering. It is suitable todetermine flash point of liquid petroleum bituminous materials, the flash point of which are lower than 93 °C
Main parameters
1. Power supply: AC 220V±10%, 50 Hz;
2. Sample cup: metal crucible (replace glass tag open cup);Depth 47 mm; the diameter of upper opening 64 mm; the diameter of lower opening 38 mm; there is a mark line, which is 3.2 mm from the rim of upper opening, in the inner wall.
3. Flame application device: it is composed of gas inlet pipe, gas flow adjustment valve and flame comparison ball. The diameter of spout is 0.7mm~0.8mm. The flame can be adjusted to 4 mm as per the relative standards.
4. Electric furnace: it is composed of heating wires and furnace plate. You can control temperature rising rate through the heating adjustment device.
5.Thermometer: 0°C~+100°C;the scale division is 1 °C; it is in accord with T0633.
6. Controlling device: it is composed of voltage regulation circuit and semiautomatic ignition device.
7. Gauge: thickness 3.2 mm; there are two shape-point projections at the lower section. There is a hole of 4.0mm and a hole of 0.8 at 3.2 mm from the bottom.
8. Ambient temperature: ≤35°C;
9.Relative humidity: ≤85%;
Send product request
Other supplier products
 |
752N Spectrophotometer.UV Vis Spectrophotometer | GD-752N Cheap UV Vis Spectrophotometer is an necessary instrument in each laboratory.And it's the most popular model for the reasonable price and g... |
 |
GD-0752 Wet Track Abrasion Tester for Road Building | Purpose: GD-0752 Wet Wheel Abrasion Loss Tester is designed and made as per T0752“Emulsified Asphalt Slurry Seal Mixture Wet Wheel Abrasion L... |
 |
GD-0624 Asphalt Tenacity Tester | Ⅰ. Purpose GD-0624 Asphalt Tenacity Tester is designed and made as per T0624 “Asphalt Tenacity Test” in the Traffic Industry Standard ... |
 |
GD-262 Aniline Point Measuring Instrument | Purpose GD-262 Aniline Point Measuring Instrument is designed and made as per the National Standard GB/T262 “Test Methods for Aniline Point o... |
 |
Engler Specific Viscometer of Tar Products | Purpose GDE-1C Engler Specific Viscometer of Tar Products is designed and made as per T0622 “Asphalt Engler Viscosity Test (Engler Viscometer... |
Same products
 |
Winner802 Photon Correlation DLS Nano particle Size Analyzer | Seller: Jinan winner particle instrument stock Co.,Ltd. | Winner802 dynamic light scattering nanometerparticle size analyzer which based on the dynamic lig... |
 |
Winner-2008A Intelligent Laser Particle Size Analyzer | Seller: Jinan winner particle instrument stock Co.,Ltd. | Winner2008A full automatic wet laser particle size analyzeradopt MIE scattering principle,measure... |
 |
Winner 2000ZDE Intelligent Laser Particle Size Analyzer | Seller: Jinan winner particle instrument stock Co.,Ltd. | Winner2000ZDE intelligent laser particle size analyzer, perform auto test, auto alignment, auto w... |
 |
Winner 2018 Intelligent Laser Particle Size Analyzer | Seller: Jinan winner particle instrument stock Co.,Ltd. | Winner2018 Automatic laser particle size analyzer, perform auto test, auto alignment, auto water ... |
 |
Winner311XP Spray Laser Particle Size Analyzer | Seller: Jinan winner particle instrument stock Co.,Ltd. | Winner311XP desktop spray laser particle size analyzer is designed and developed specially for th... |
