PUE 3-Jaw Slant-Column Pull Back Draw Down Power Chuck for I.D.
(1). PUE I.D. slant-column pull back chuck is suitable for machining the workpiece with the requirement of positioning, verticality, concentricity and parallelism of the end surface. It only needs to change the clamps when different workpieces are installed.
(2). Pull the workpiece back toward the baffle and clamp it at the same time, so it has the function of completely sticking the workpiece to the reference surface.
(3).Centrifugal force compensation.
(4). Less maintenance, lower wear, long-term stable accuracy, constant clamping force.
(5). Repeat positioning accuracy up to: 0.025mm.
(6). Chuck diameter range: 135-304 mm, 5 to 12 inch
(7). Material: Steel.
(8). Clamp and pull back the workpiece inner diameter, with a strong clamping force.
Other supplier products
|
|
KBL/KBLT 2-Jaw / 3-Jaw Ultra Long Stroke Hydraulic Power Chuck |
(1). KBL / KBLT hydraulic chuck with 6 inch, 8 inch, 10 inch, 12 inch,15 inch,18 inch size and divided into 2- jaw type, 3-jaw type, . (2). Clampin... |
|
|
BD 3-Jaw Large Through-Hole Hollow Hydraulic Power Chuck For Thick Bar |
(1). BD 3-jaw large through-hole hollow hydraulic chuck with 6 inch, 8 inch, 10 inch, 12 size. (2). Clamping force is large, long stroke achieve la... |
|
|
MDS/MDL 3-Jaw / 6-Jaw Diaphragm Clamping Power Chuck For Gear Processing |
(1). Diaphragm chuck is a fully sealed chuck, 3-jaw type, 6-jaw type to choose. (2). It is based on the outer diameter of the gear P.C.D for clampi... |
|
|
NHZ 60 degrees/120 degrees Automatic Trisected Hydraulic Indexing Power Chuck |
(1). Once loading card can process more than 2 stations. (2). Spindle rotation can be used for automatic indexing, for 6X60 degrees or 3X120 degree... |
|
|
PU/PUT 2-Jaw / 3-Jaw Slant-Column Pull Back Draw Down Power Hollow Chuck |
(1). PU/PUT hollow slant-column pull back chuck is suitable for machining the workpiece with the requirement of positioning, verticality and parall... |
All supplier products
Same products
